Netgear WC7600 Reference Manual - Page 230

ProSAFE Wireless Controller WC7600 Configure a Stack A stack can consist of up to three wireless controllers, one of which is the master controller and two of which are slave controllers. The following procedure assumes that you have already configured the system settings, profiles, security settings, and wireless settings on the master controller, and that you have already configured the system settings on the slave controller.  To create a stack by adding a slave controller to a wireless controller that functions as the master controller: 1. Open a web browser. In the browser's address field, type the http:// followed by the IP address that you assigned to the wireless controller. By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250. The wireless controller's login screen displays. 2. Enter your user name and password. If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary screen. 4. Select Stacking > Stacking. The Stacking screen displays: The Stacking table shows the master wireless controller with its IP addresses. 5. Click the Add button. Manage Stacking and Redundancy 230