Netgear WC7600 Reference Manual - Page 265

ProSAFE Wireless Controller WC7600 The wireless controller's login screen displays. 2. Enter your user name and password. If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary screen. 4. Select Monitor > Controller > Summary. The following table describes the fields of the Network Status, Wireless Clients, Most Active APs, Most Active Clients and Most Active SSIDs tables of the screen. The Controller Info section is self-explanatory. Item Network Status Total Up Down Alarms Critical Major Wireless Clients Open WEP WPA Description The total number of managed devices that are running correctly. The total number of managed devices that cannot be pinged. The wireless controller can ping these managed devices, but either cannot log in or has detected that these devices are different from the ones that were configured. The number of managed devices for which the configuration differs from the one that is set on the wireless controller. This situation occurs most likely because the device runs outdated firmware or the wireless controller changed the configuration while the device was down or offline. The number of wireless clients that are connected to managed access points using security profiles configured with open mode. The number of wireless clients that are connected to managed access points using security profiles configured with WEP. The number of wireless clients that are connected to managed access points using security profiles configured with WPA. Monitor the Wireless Network and Its Components 265