Netgear WC7600 Reference Manual - Page 209

ProSAFE Wireless Controller WC7600 Specify Session Time-Outs If an HTTP session times out, the user is redirected to the login screen for password verification.  To specify the length of the HTTP session time-out for the wireless controller: 1. Open a web browser. In the browser's address field, type the http:// followed by the IP address that you assigned to the wireless controller. By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250. The wireless controller's login screen displays. 2. Enter your user name and password. If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary screen. 4. Select Maintenance > Remote Management > Session Timeout. The Session Timeout screen displays: 5. In the Timeout (minutes) field, specify number of minutes before an active HTTP login session expires. The default session time-out is 5 minutes. 6. Click the Apply button. Manage the System Logs You can save the system logs that are collected on the wireless controller. You can also query the system logs for individual access points, clients, and SSIDs. If a problem or failure occurs, the system logs along with backed-up configuration settings could help determine the cause. Maintain the Wireless Controller and Access Points 209