Netgear WC7600 Reference Manual - Page 76
Configuration > System > Alerts/Logs > Logs/Syslog, LOG_LEVEL_ERR
View all Netgear WC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
ProSAFE Wireless Controller WC7600 To configure the log settings and view the logs: 1. Open a web browser. In the browser's address field, type the http:// followed by the IP address that you assigned to the wireless controller. By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250. The wireless controller's login screen displays. 2. Enter your user name and password. If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary screen. 4. Select Configuration > System > Alerts/Logs > Logs/Syslog. The Log Settings screen displays: 5. In the Log Settings section of the screen, configure either event tracing or a log level (these selections are mutually exclusive): • Event tracing. To configure event tracing: a. Select the Event Tracing check box. b. Next to Time Duration, use the menus to specify the period during which event tracing should occur. • Log level. From the Log Level menu, select one of the following levels: - LOG_LEVEL_CRIT. Critical errors only are logged. - LOG_LEVEL_ERR. Noncritical errors and critical errors are logged. - LOG_LEVEL_WARN. Warnings, noncritical errors, and critical errors are logged. Configure the System and Network Settings and Register the Licenses 76