Netgear WC7600 Reference Manual - Page 20

ProSAFE Wireless Controller WC7600 • Manage Other Wireless Controllers in the Network - Manage stacking. Specify the master and slave wireless controllers in a stack and synchronize information between the wireless controller. For more information, see Chapter 11, Manage Stacking and Redundancy. • Monitor the Network and Its Components - Monitor the status of all wireless devices. View the status of the wireless controllers, access points, clients, access point profiles, and the entire network, and view network usage statistics. - Monitor network health. See which access points are healthy and which ones are down or compromised. For more information, see Chapter 12, Monitor the Wireless Network and Its Components. Licenses By default, the wireless controller comes with a trial license for five access points. You must purchase and register licenses for the access points in your network. Licenses are tied to the serial number of the wireless controller. You can purchase a single 50-access point license or licenses in 10-,or 50-access point increments for support of up to 150 access points on a single wireless controller: • 10-AP license. WC10APL • 50-AP license. WC50APL If you have three wireless controllers in a stack and want to support the maximum number of 150 access points in a stacked configuration, you must purchase three WC50APL licenses (or a combination of other licenses that add up to a total of 150 access points). For more information, see the datasheet that you can download from http://support.netgear.com/product/WC7600. For information about how to register and manage your licenses, see Register Your Licenses on page 70 and Manage Licenses on page 219. Maintenance and Support NETGEAR offers technical support seven days a week, 24 hours a day. Information about support is available on the NETGEAR ProSupport website at http://kb.netgear.com/app/answers/detail/a_id/212. Introduction 20