Netgear WC7600 Reference Manual - Page 246

ProSAFE Wireless Controller WC7600 Setting VRRP ID [1-255] Local IP Description For each primary controller in the redundancy group, enter a number from 1 through 255 as the VRRP ID. This enables each primary controller to have a unique relationship with the redundant controller. For each primary controller in the redundancy group, enter a local IP address. If a failover occurs, this IP address remains assigned to the primary controller and does not transfer to the redundant controller to let you identify the primary controller before and after the failover. WARNING: Enabling redundancy causes the wireless controller to reboot, which might temporarily affect traffic on the managed access points in the network. 7. Click the Apply button. 8. Select Monitor > Network. The Network monitoring screens displays. 9. Click the Refresh button. The Network monitoring screen displays redundancy information. Change a Redundant Controller  To change the redundant controller after you have configured redundancy: 1. Log in to the wireless controller. For more information, see Log In to the Wireless Controller on page 52. 2. Click the Replace button. The Replacing Controller Information pop-up window displays. Note: The Replace button displays onscreen only after a redundancy configuration has become active. The button is shown on Figure 25 on page 243. Manage Stacking and Redundancy 246