Netgear WC7600 Reference Manual - Page 96

ProSAFE Wireless Controller WC7600 10. Configure the settings as described in the following table: Setting Description Profile Definition section Name Enter a unique name to identify the profile. This value can be up to 32 alphanumeric characters. Use meaningful profile names instead of the default names. The default profile names are Profile1, Profile2, and so on, through Profile8. Wireless Network Name Enter a unique name for the wireless network associated with this profile. (SSID) Broadcast Wireless Network Name Select the Yes radio button to enable broadcast of the SSID. This is the default setting. Select the No radio button to disable broadcast of the SSID, in which case only devices that have the correct SSID can connect to the access point. Client Authentication section Note: The options that display onscreen depend on your selection from Network Authentication menu. Network Authentication From the menu, select the authentication type to be used. Table 7 on page 100 lists all authentication types. Data Encryption From the menu, select the data encryption type to be used. The options available for data encryption as well as other requirements such as entering a key or passphrase depend on the network authentication settings. Table 7 on page 100 lists all data encryption options. Wireless Client Security Separation From the menu, select Disable to prevent associated wireless clients from communicating with each other, or select Enable to allow such communication. Wireless client separation is intended for hotspots and other public access situations. VLAN Enter the VLAN ID to be associated with this security profile. This VLAN ID must match the VLAN ID that other network devices use. Manage Security Profiles and Profile Groups 96