Netgear WC7600 Reference Manual - Page 195

ProSAFE Wireless Controller WC7600 Configure Rate Limiting for the Basic Profile Group In the basic profile group, for each radio mode (802.11b/bg/ng mode and 802.11a/na mode), rate limiting per profile adds up to a maximum of 100 percent. (It can be less than 100 percent.)  To configure rate limiting for the basic profile group: 1. Open a web browser. In the browser's address field, type the http:// followed by the IP address that you assigned to the wireless controller. By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250. The wireless controller's login screen displays. 2. Enter your user name and password. If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary screen. 4. Select Configuration > Profile > Basic > Rate Limit. The basic Rate Limit screen displays: Each wireless radio has its own tab. 5. Click the tab for the radio for which you want to configure rate limiting. 6. For each profile on a wireless radio, specify the rate limit as a percentage. You can drag the sliders to adjust the values in the Rate Limit fields to the right of the sliders. Make sure that the total percentages of all profiles on one wireless radio do not exceed 100 percent. 7. Click the Apply button. Configure Wireless and QoS Settings 195