Netgear WC7600 Reference Manual - Page 12

ProSAFE Wireless Controller WC7600 Package Contents The ProSAFE Wireless Controller WC7600 product package contains the following items: • ProSAFE Wireless Controller WC7600 appliance • One AC power cable • Rubber feet (four) with adhesive backing • One rack-mount kit • Straight-through Category 5 Ethernet cable • ProSAFE Wireless Controller WC7600 Installation Guide If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair. Hardware Features The front panel ports, slots, and LEDs, back panel components, and bottom label of the wireless controller are described in this section. Front Panel Ports, Slots, and LEDs The following figure shows the front panel of the wireless controller. ID Power Status Fan Stack Master Reset USB LED Mode: Green= Link at 10G, Blink Green=10G Active, Yellow=Link at 1G, Blink Yellow=1G Active Figure 1. Front panel LED Mode: Left LED: Green=Link at 1G E, Yellow=Link at 10/100M Right LED:Green=Link, Green Blink=Active The following figure shows a close-up of the left side of the front panel. USB port Digital access point counter ID Power LED Mode: Green= Link at 10G, Blink Green=10G Active, Yellow=Link at 1G, Blink Yellow=1G Active Status Fan Stack Master USB Reset Reset button Slots and LEDs LEDs (top to bottom): for optional Power, Status, Fan, Stack Master SFP and SFP+ GBIC module Figure 2. Front panel close-up LED Mode: Left LED: Green=Link at 1G E, Yellow=Link at 10/100M Right LED:Green=Link, Green Blink=Active Ethernet port and LEDs Console 9600,N,8,1 Introduction 12