Netgear WC7600 Reference Manual - Page 93

ProSAFE Wireless Controller WC7600 The following table describes the fields that are shown for each profile in a profile group. Setting Name Radio Authentication Description The unique profile name. The wireless radio in which the profile is operating. The authentication setting under which the profile is operating. Remove an Advanced Profile Group You can remove an advanced profile group  To remove an advanced profile group: 1. Open a web browser. In the browser's address field, type the http:// followed by the IP address that you assigned to the wireless controller. By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250. The wireless controller's login screen displays. 2. Enter your user name and password. If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary screen. 4. Select Configuration > Profile > Advanced > Radio. The Profile Groups screen displays. 5. Click the tab for the profile group that you want to remove. 6. Click the Delete button. Note: There is no separate procedure to change profile groups. You change profile groups by adding, removing, or changing profiles in the profile group. Configure a Profile in an Advanced Profile Group For each profile group, the Edit Profile (Group-X, in which X is the group number) screen lets you create and configure up to 8 security profiles per wireless radio (8 profiles for a single-band access point; 16 profiles for a dual-band access point). Separate profiles are applied to 802.11b/bg/ng-mode and 802.11a/na-mode radios. Manage Security Profiles and Profile Groups 93