Netgear WC7600 Reference Manual - Page 214

ProSAFE Wireless Controller WC7600 4. Select Maintenance > Logs & Alerts > System Alerts. The System Alerts screen displays: 5. If the table contains many entries, navigate through the table by using the following buttons and menu that display at the bottom of the table: • To move to the next page, click the Next button. • To move to the previous page, click the Previous button. • To change the number of entries onscreen, from the Entry Per Page menu, select 20, or 40, or 60, and so on, or All. 6. (Optional) Click one of the following buttons: • Refresh. Displays the latest alerts onscreen. • Clear All. Clears all alerts from the screen and from memory. NETGEAR recommends that you save the alerts before you clear them. • Export. Saves the alerts to your computer. To save the alerts, follow the directions of your browser. View Radio Frequency Events The wireless controller generates alerts for radio frequency (RF) events such as the detection of a coverage hole, a change of channel, or a managed access point going down.  To view RF events: 1. Open a web browser. In the browser's address field, type the http:// followed by the IP address that you assigned to the wireless controller. By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250. Maintain the Wireless Controller and Access Points 214