Netgear WC7600 Reference Manual - Page 78

ProSAFE Wireless Controller WC7600 The Log Settings screen displays: 5. In the Syslog Settings section of the screen, configure the settings as described in the following table: Setting Enable Syslog Description Enable the syslog settings, if you have a syslog server on your network. Syslog Server IP Address Enter the IP address to which the wireless controller and managed access points send all syslogs, if the Enable Syslog check box is selected. Note: Before you configure the IP address of the syslog server on the wireless controller, make sure that you have set up a syslog server (such as a computer running a syslog service) and that the syslog server is available on the network. Server Port Number Enter the number of the port at which your syslog server is configured to listen to requests. Log Level From the Log Level menu, select one of the following levels: • LOG_LEVEL_CRIT. Critical errors only are logged. • LOG_LEVEL_ERR. Noncritical errors and critical errors are logged. • LOG_LEVEL_WARN. Warnings, noncritical errors, and critical errors are logged. • LOG_LEVEL_NOTICE. Notifications, warnings, noncritical errors, and critical errors are logged. • LOG_LEVEL_INFO. Informational messages, notifications, warnings, noncritical errors, and critical errors are logged. 6. Click the Apply button. Configure the System and Network Settings and Register the Licenses 78