Netgear WC7600 Reference Manual - Page 174
enable, disable, Multicast/Broadcast Rate Limiting Packet Count, Setting, Description
View all Netgear WC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
ProSAFE Wireless Controller WC7600 Setting Description AMPDU (802.11n only) Select the enable radio button to allow the aggregation of several MAC frames into a single large frame to achieve higher throughput. Enabled is the default setting. Enabling AMPDU could lead to better network performance. Select the disable radio button to disable this option. RIFS Transmission (802.11n only) Select the enable radio button to enable the reduced interframe space (RIFS) option to allow transmission of successive frames at different transmit powers. Enabling RIFS could lead to better network performance. Select the disable radio button to disable this option. Disabled is the default setting. DTIM Interval (1-255) Enter the delivery traffic indication message (DTIM) or the data beacon rate that you want to use. The message period of the beacon delivery traffic indication is set in multiples of beacon intervals. Preamble Type (802.11b/bg only) Select one of the following radio buttons to specify the preamble type: • Auto. Automatically handles both long and short preambles. A short transmit preamble provides better performance. Auto is the default setting. • Long. Enables a long transmit preamble to provide a more reliable connection or a slightly longer range. Multicast/Broadcast Rate Limiting Select the enable radio button to enable multicast and broadcast rate limiting, which can increase bandwidth and minimize interference. To configure the maximum packet rate, enter a packet rate in the Multicast/Broadcast Rate Limiting Packet Count field. By default, the wireless controller uses the following maximum packets rates: • For the 2.4 Ghz radio, up to 63 packets per second. • For the 5 GHz radio, up to radio 300 packets per second. Select the disable radio button to disable multicast and broadcast rate limiting. Disabled is the default setting. Multicast/Broadcast Rate Limiting Packet Count If you enable multicast and broadcast rate limiting and do not want to use the default values, you can decrease the maximum packet rate. The wireless controller supports the following packet rates: • For the 2.4 Ghz radio, from 1 to 63 packets per second. • For the 5 GHz radio, from 1 to 300 packets per second. Configure Wireless and QoS Settings 174