Netgear WC7600 Reference Manual - Page 142

ProSAFE Wireless Controller WC7600 If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary screen. 4. Select Configuration > Security > Basic > Rogue AP. The basic Rogue AP screen displays: The wireless controller can support a total of up to 512 access points from the known and unknown lists combined. 5. Next to Rogue AP Detection, select the enable radio button. 6. Next to Alert Severity, select the severity of the alarm when a rogue access point is detected: • Major. A major alarm is triggered. • Minor. A minor alarm is triggered. 7. Click the Apply button. Because the neighboring and rogue access points are detected during off-channel scans, it typically takes about 30 minutes after the rogue AP detection is enabled for the neighbor and rogue access points to be detected on one channel. Once the neighbor and rogue access points are detected, the wireless controller populates the known list (that is, the database with known access points) and unknown list (that is, the database with unknown access points). Classify Rogue Access Points You can identify what could be access points from neighboring businesses that are known. As you identify access points, mark them as known or unknown so that the wireless controller does not keep finding them and flagging them. Marking the access points can help you to identify your own equipment that should be managed and the rogue access points that should be detected. A rogue access point has both a wireless and a LAN connection. A neighbor is an access point with only a wireless connection, not a LAN connection. Manage Rogue Access Points, Guest Network Access, and Users 142