Netgear WC7600 Reference Manual - Page 97
Local MAC ACL Group, WPA & WPA2
View all Netgear WC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
ProSAFE Wireless Controller WC7600 Setting Description Authentication Settings section Note: The options that display onscreen depend on the selection from Network Authentication menu. Note: The MAC ACL MAC ACL buttons displays only when you select Open System, Shared Key, WPA-PSK, WPA2-PSK, or WPA-PSK & WPA2-PSK from the Network Authentication menu. Select one of the following radio buttons: • Local. Use local MAC authentication. The Local MAC ACL Group menu displays so you can select a group. For more information, see Manage MAC Authentication and MAC Authentication Groups on page 109. • External. Use external MAC authentication. The External Radius Server menu displays so you can select a server. You can select either the basic-Auth RADIUS server or a RADIUS server of an advanced authentication group. You cannot use the external LDAP server. For information about setting up and enabling internal and external authentication servers, see Manage Authentication Servers and Authentication Server Groups on page 104. Note: The MAC ACL radio buttons do not display onscreen if the network authentication uses an external RADIUS server. The reason for this is that you can configure either MAC authentication with an external RADIUS server or network authentication with an external RADIUS server, but not both. That is, if you configure an external RADIUS server with WPA, WPA2, or WPA & WPA2 (or you use Legacy 802.1X), you cannot use external MAC authentication, and the MAC ACL radio buttons do not display on screen. You can still use internal MAC authentication. Note: The Captive Portal check box displays only when you select Open System, Shared Key, WPA-PSK, WPA2-PSK, or WPA-PSK & WPA2-PSK from the Network Authentication menu. Captive Portal Select the Captive Portal if you want to enable the captive portal. For more information, see Manage Guest Network Access on page 145. Note: If the network authentication uses a RADIUS server, whether it is a local server or an external server, you cannot configure captive portal authentication. That is, if you configure a RADIUS server with WPA, WPA2, or WPA & WPA2 (or if you use legacy 802.1X), the Captive Portal check box is not shown onscreen. Note: The Authentication Select one of the following radio buttons: Authentication Server Server buttons and menu display • Local. Use the local authentication server. only when you select WPA • External. Use an external authentication server. with Radius, WPA2 with Select an external authentication server from the Radius, or WPA & WPA2 Authentication Server menu. with Radius from the Network Authentication menu. Note: For information about setting up and enabling internal and external authentication servers, see Manage Authentication Servers and Authentication Server Groups on page 104. Manage Security Profiles and Profile Groups 97