Netgear WC7600 Reference Manual - Page 136

ProSAFE Wireless Controller WC7600 Setting Description Wireless Settings section Antenna You can specify which antenna the access point uses by making a selection from the menu: • Internal. The access point uses its internal antenna. • External. The access point uses its external antenna or antennas. External antennas are optional antennas that do not come standard with an access point. Plan Settings section Site The site designation is always Local. Building The building designation is always Building-1, which is a fixed selection from the menu. Floor The floor designation is always Floor-1, which is a fixed selection from the menu. Location Enter a name that is meaningful to you. 8. Click the Apply button. 9. Click the Back button. The Managed AP List screen displays. Changes that you made on the Edit Access Point screen are displayed in the table. 10. If the changes do not display in the table, click the Refresh button. Remove Access Points from the Managed AP List To restore a managed access point to its original firmware and use it once again as a standalone access point, remove the access point from the Managed AP List. Log in to the access point's web management interface, upgrade the firmware to the standalone AP firmware version, and reboot the access point.  To remove an access point from the Managed AP List: 1. Open a web browser. In the browser's address field, type the http:// followed by the IP address that you assigned to the wireless controller. By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250. The wireless controller's login screen displays. 2. Enter your user name and password. If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. 3. Click the Login button. Discover and Manage Access Points 136