Netgear WC7600 Reference Manual - Page 171
Con Wireless Settings for an Advanced Profile Group, Apply, admin, password, Login
View all Netgear WC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
ProSAFE Wireless Controller WC7600 6. Configure the settings in the table at the bottom of the screen as described in the following table: Setting Description AP Name The name of the access point. Access Point Channel Override these settings only if you have a specific need. From the menu, select a channel and frequency for the access point to operate in. Note: Changing a channel might temporarily affect the traffic on the access point. Note: By default, the access point's channel and frequency are set to the ones that are enabled for the radio and profile group. If the channel and frequency are not available on the access point, the channel and frequency are set to the ones providing the highest performance. For more information, see Configure Channels on page 177. Tx Power From the menu, select the transmission power of the access point. Note: By default, the access point's transmission power is set to the configuration that is selected on the basic RF Management screen. For more information, see Configure Radio Frequency Management for the Basic Profile Group on page 181. 7. Click the Apply button. Configure Wireless Settings for an Advanced Profile Group Two requirements exist for you to be able to configure the wireless settings on the Advanced Wireless Settings screen: • You must disable automatic channel allocation for the radio on the Channel Allocation screen. For information about channel allocation, see Configure Channels on page 177. • At least one access point must be assigned to the profile group for the radio for which you want to configure the wireless settings. To configure wireless settings for an advanced profile group: 1. Open a web browser. In the browser's address field, type the http:// followed by the IP address that you assigned to the wireless controller. By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250. The wireless controller's login screen displays. 2. Enter your user name and password. If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary screen. Configure Wireless and QoS Settings 171