Pentax 19231 T30 Operating Manual - Page 175
Flash On p.62., Shooting, the Auto
UPC - 027075126640
View all Pentax 19231 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Troubleshooting Problem Cause Solution Lock focus on another object located at the same distance (press shutter Subject is difficult to focus release button halfway), then compose on with autofocus picture and press shutter release button fully, or use Manual Focus mode (p.73). Subject is not in focus Subject is not in focusing area Position subject in focus frame in middle of LCD monitor. If the subject is outside the focusing area, aim the camera at the subject and lock the focus (press shutter release button halfway), then compose picture and press the shutter release button fully. Subject is too close Set focus mode to q (Macro) (p.72). Focus mode is set to q (Macro) Subjects at a distance of 40 cm or greater will be out of focus if taken with the focus mode set to q (Macro) (p.72). Subject is too dark to focus on Set auxiliary AF light to On (p.75). Flash mode is set to a (Flash Off) Set to , (Auto) or b (Flash On) (p.62). The shooting mode is set Flash does not discharge to C (Movie), the drive mode is set to 1 (Cont. Shooting), the Auto Switch to a different mode. Bracket is set to Exposure, or the focus mode is set to s (Infinity) Subject is blurred Camera moved when taking a picture Use a tripod and the self-timer or remote control function when taking a picture (p.71). 7 Subject moved when taking a picture Use flash or set a higher ISO sensitivity to increase the shutter speed (p.71). Camera is unable to Colors in picture are not accurate automatically adjust white balance, or setting is Check the white balance setting (p.64). incorrect Appendix 173