Ricoh 2045 General Settings Guide - Page 68
Output: Printer printer, Prepare Stapling, <F/F4>Size Setting, Output tray settings - printer driver
UPC - 026649003776
View all Ricoh 2045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
User Tools (System Settings) v Output: Printer (printer) You can specify a tray to which documents are delivered. Note r Default: Internal Tray 1 r The output trays set on the printer driver have priority over the output tray specified above. r For details about output trays, see p.53 "Output: Copier (copier)". v Prepare Stapling When the booklet finisher is installed, perform a stapling test (five to seven times) after replacing staples for saddle stitching, or removing jammed staples. 4 Note r The display for this setting appears only when the booklet finisher is in- stalled. See p.133 "Using "Prepare Stapling "in User Tools to initialize the staple unit". v Size Setting Currently three types of F size are available; 81/2"×13"L, 81/4"×13"L and 8"×13"L. The ADF or exposure glass cover sensor cannot distinguish these three types of originals. This function sets the F size from the ADF or exposure glass cover sensor. Auto Paper Select or Auto Reduce/Enlarge can be used for F size originals based on this setting. Note r Default: 81/2"×13"L Output tray settings Limitation r You cannot interrupt the current stapling job even if a stapling job is specified by a different function. r When the 1000-sheet finisher, 2 Tray finisher or booklet finisher is installed and stapling or shift-sorting is specified for a job, the job will be delivered to the finisher shift tray, finisher shift tray 1 or finisher shift tray 2 regardless of the output tray specified. 54