Ricoh Aficio SP 5210SF Network Guide - Page 158
bonjour, msh> autonet {on|off}
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
4. Monitoring and Configuring the Machine msh> autonet {on|off} • {on} means "active" and {off} means "inactive". Current interface priority configuration display msh> autonet priority Interface priority configuration msh> autonet priority "interface_name" • You can give interface's AutoNet parameter priority. • Priority settings are available when multiple interfaces are installed. • wlan can be specified only when the IEEE 802.11 interface is installed. 4 Interface Interface configured ether Ethernet interface wlan IEEE 802.11 interface • If an interface is not selected, the current interface connection settings remain in effect. bonjour Use the "bonjour" command to display bonjour-related settings. View settings Bonjour settings are displayed. msh> bonjour Bonjour service name setting You can specify the bonjour service name. msh> bonjour cname "computer name" • The computer name can be entered using up to 63 alphanumeric characters. • If you do not specify a character string, the current setting is displayed. Bonjour Installation location information setting You can enter information about the location where the printer is installed. msh> bonjour location "location" • Information about the location can be entered using up to 32 alphanumeric characters. • If you do not specify a character string, current setting is displayed. 156