Ricoh Aficio SP 5210SF Network Guide - Page 159
IP TTL setting, Setting IPP-SSL printing
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Remote Maintenance Using telnet Setting order of priority for each protocol • msh> bonjour diprint [0-99] • msh> bonjour lpr [0-99] • msh> bonjour ipp [0-99] You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller numbers indicate higher priority. IP TTL setting msh> bonjour ipttl [1-255] You can specify the IP TTL (the number of routers a packet can pass through). • The default is 255. Resetting the computer name and location information 4 You can reset the computer name and location information. msh> bonjour clear {cname|location} • cname: Reset the computer name. The default computer name will be displayed when the computer is restarted. • location: Reset the location information. The previous location information will be deleted. Interface configuration msh> bonjour linklocal "interface_name" • If you do not specify an interface, the Ethernet interface is selected automatically. • If many types of interface are installed, configure the interface that communicates with linklocal address. • If you do not specify an interface, the Ethernet interface is automatically selected. • wlan can be specified only when the IEEE 802.11 interface is installed. Interface ether wlan Interface configured Ethernet interface IEEE 802.11 interface Setting IPP-SSL printing msh> bonjour ippport {ipp|ssl} • If IPP-SSL Printing is set to ssl, the IPP port number will appear as 443, and IPP-SSL printing can be performed with higher security. • If IPP-SSL Printing is set to ipp, the IPP port number will appear as 631. Port 631 is the port for normal IPP printing. 157