Ricoh Aficio SP 5210SF Network Guide - Page 161
dhcp6, p.303 Using DHCP
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Remote Maintenance Using telnet Interface priority configuration msh> dhcp priority "interface_name" • You can select which interface has DHCP parameter priority. • Priority settings are available when multiple interfaces are installed. DNS server address selection msh> dhcp dnsaddr {dhcp|static} • Specify whether to obtain the DNS server address from the DHCP server or use the address set by a user. • To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set by a user, specify "static". Domain name selection 4 msh> dhcp "interface_name" domainname {dhcp|static} • Specify whether to obtain the domain name from the DNS server or use the domain name set by a user. • To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set by a user, specify "static". • p.303 "Using DHCP" dhcp6 Use the "dhcp6"command to display or configure DHCPv6 settings. View settings The following command displays the current DHCPv6 settings. msh> dhcp6 DHCPv6-lite configuration and display msh> dhcp6 "interface_name" lite {on|off} • Specify "on" to enable DHCPv6. Specify "off" to disable DHCPv6. • If the DNS server address and domain name are obtained from DHCPv6, be sure to specify {on}. • wlan can be specified only when the IEEE 802.11 interface is installed. Interface name ether Interface configured Ethernet interface 159