Ricoh Aficio SP 5210SF Network Guide - Page 319
When you select [TLS], you must install IEEE 802.1X Client Certificate., Select [CHAP], [MSCHAP]
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 319 highlights
Configuring IEEE 802.1X • Click [Change] in "Phase 2 User Name", and then enter the user name set in the RADIUS server. • Select [CHAP], [MSCHAP], [MSCHAPv2], [PAP], or [MD5] in "Phase 2 Method". Certain methods might not be available, depending on the RADIUS server you want to use. • Make the following settings according to the operating system you are using: • Select [On] or [Off] in "Authenticate Server Certificate". • Select [On] or [Off] in "Trust Intermediate Certificate Authority". • Enter the host name of the RADIUS server in "Server ID". • Select [On] or [Off] in "Permit Sub-domain". PEAP • Click [Change] in "Password", and then enter the password set in the RADIUS server. If [TLS] is selected for "Phase 2 Method", you do not need to specify a password. • Click [Change] on "Phase 2 User Name", and then enter the user name set in the RADIUS server. • Select [MSCHAPv2] or [TLS] in "Phase 2 Method". When you select [TLS], you must install "IEEE 802.1X Client Certificate". • Make the following settings according to the operating system you are using: • Select [On] or [Off] in "Authenticate Server Certificate". 7 • Select [On] or [Off] in "Trust Intermediate Certificate Authority". • Enter the host name of the RADIUS server on "Server ID". • Select [On] or [Off] in "Permit Sub-domain". 7. Click [OK]. 8. "Updating..." appears. Wait for about one or two minutes, and then click [OK]. 9. In the menu area, click [Configuration]. 10. Under "Interface", click [Wireless LAN Settings]. 11. Select [Wireless LAN] in "LAN Type". 12. Select [Infrastructure Mode] in "Communication Mode". 13. Enter the alphanumeric characters (a-z, A-Z, or 0-9) in [SSID] according to the access point you want to use. 14. Select [WPA] in "Security Method". 15. Select [TKIP] or [CCMP (AES)] in "WPA Encryption Method" according to the access point you want to use. 16. Select [WPA] or [WPA2] in "WPA Authentication Method". 17. Click [OK]. 317