Ricoh Aficio SP 5210SF Network Guide - Page 78
Connecting to the Gigabit Ethernet Interface (mainly North America)
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
2. Connecting the Machine 5. Turn on the main power switch of the machine. 1 2 2 3 CFL013 1. Indicator (green) When 10BASE-T is operating, the LED is lit green. When 100BASE-TX is operating or the machine is not connected to the network, it is turned off. 2. Indicators (both orange and green) When 1000BASE-T is operating, both LED are lit. 3. Indicator (orange) When 100BASE-TX is operating, the LED is lit orange. When 10BASE-T is operating or the machine is not connected to the network, it is turned off. • For details about how to turn on the main power switch, see "Turning On/Off the Power", About This Machine. • For details about installing the printer driver, see "Preparing the Machine", Printer Reference. Connecting to the Gigabit Ethernet Interface America) (mainly North This section describes how to connect the Ethernet interface cable to the Gigabit Ethernet port. Caution: Properly shield twisted pair cable (STP cable) must be used for connections to a host computer (and/or peripheral) in order to meet FCC emission limits. • If the main power switch is on, turn it off. • Use the following Ethernet cables. • When using 100BASE-TX/10BASE-T: Shielded Twisted Pair Cable (STP) and Category type 5 or more • When using 1000BASE-T: 76