Ricoh Aficio SP 5210SF Network Guide - Page 39
Specify the machine's IPsec function Active/Inactive., DDNS Configuration, IPsec, Domain Name
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Interface Settings Default: [Auto-Obtain (DHCP)] When you select [Specify], enter the DNS Server IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a number). DDNS Configuration 1 Specify the DDNS settings. Default: [Active] IPsec Specify the machine's IPsec function Active/Inactive. Default: [Inactive] For details about this function, consult your administrator. Domain Name Specify the domain name. Default: [Auto-Obtain (DHCP)] When you select [Specify], enter the domain name using up to 63 characters. WINS Configuration Specify the WINS server settings. Default: [On] If [On] is selected, enter the WINS Server IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a number). If DHCP is in use, specify the Scope ID. Enter a Scope ID using up to 31 characters. Do not enter "255.255.255.255" as the primary or secondary WINS server address. Effective Protocol Select the Protocol to use in the network. Default for "IPv4": [Active] Default for "IPv6": [Inactive] Default for "NetWare": [Inactive] "NetWare" is displayed only when Netware is installed. Default for "SMB": [Active] NCP Delivery Protocol Select the protocol NCP delivery. Default: [TCP / IP Priority] If you select [IPX Only] or [TCP / IP Only], you cannot switch the protocol even if you cannot connect with it. If "NetWare" in "Effective Protocol" is set to [Inactive], you can only use TCP/IP. 37