Ricoh Aficio SP 5210SF Network Guide - Page 222
Snmpd Start., Connection to the SMTP server failed, because
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
4. Monitoring and Configuring the Machine Message Problem and solutions SMTPC: failed to get smtp server ip-address. The SMTP server IP address could not be obtained. This could be because: • The specified DNS server could not be found. • No connection to the network has been established. • An incorrect DNS server is specified. 4 SMTPC: no smtp server. connection close. • The specified SMTP server IP address could not be found in the DNS server. Connection to the SMTP server failed due to no response from SMTP. This could be because a server other than the SMTP server has been specified, or the specified SMTP server port number is incorrect. Check the SMTP server name, port number, or the SMTP server port number. SMTPC: refused connect by smtp server. Connection to the SMTP server is denied. This could be because server other than the SMTP server has been specified, or the specified SMTP server port number is incorrect. Check the SMTP server name, port number, or the SMTP server port number. SMTPC: username or password wasn't correct. [response code] (information) Connection to the SMTP server failed, because the specified SMTP user name is incorrect, or the specified SMTP password is incorrect. Check the SMTP user name and password. Snmp over IPv4 is ready. Communication over IPv4 with snmp is available. Snmp over IPv6 is ready. Communication over IPv6 with snmp is available. Snmp over IPX is ready. Communication over IPX with snmp is available. Snmpd Start. The snmpd has started. This message is displayed only when the power is turned on. started. The direct printing service has started. started. The IKE service has started. 220