Ricoh Aficio SP 5210SF Network Guide - Page 81
Connecting a Device to the Machine's USB Host Interface, Connecting to the Wireless LAN Interface
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Connecting to the Interface Connecting a Device to the Machine's USB Host Interface This section explains how to connect a device to the machine's USB host interface. 1. Connect one end of the USB interface cable to the machine's USB host interface. 2 CFL010 2. Connect the other end of the USB interface cable to a card authentication device or media slot. • This machine does not come with a USB interface cable. Make sure you purchase the appropriate cable. Connecting to the Wireless LAN Interface This section describes how to connect to the wireless LAN interface. • Check the machine's IPv4 address and subnet mask, or the IPv6 address settings. • For details about how to set the IPv4 address and subnet mask from the control panel of the machine, see "Interface Settings". • Before using this machine with a wireless LAN interface, you must select [Wireless LAN] in [LAN Type]. • p.36 "Interface Settings" Setup Procedure This section describes how to setup wireless LAN interface. To configure the wireless LAN settings: open [System Settings], [Interface Settings], select [Wireless LAN], and then use the following procedure. 79