Ricoh Aficio SP 5210SF Network Guide - Page 167
ifconfig
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Remote Maintenance Using telnet • If you do not specify an interface, the Ethernet interface is selected automatically. Interface name ether wlan Interface configured Ethernet interface IEEE 802.11 interface Initializing the printer name for each interface msh>hostname "interface_name" clear name ifconfig 4 Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet mask, broadcast address, default gateway address) for the printer. View settings msh> ifconfig IPv4 configuration msh> ifconfig "interface_name" "address" • If you did not enter an interface name, it is automatically set to the Ethernet interface. • wlan can be specified only when the IEEE 802.11 interface is installed. Interface name ether wlan Interface configured Ethernet interface IEEE 802.11 interface The following explains how to configure an IPv4 address 192.168.15.16 on the Ethernet interface. msh> ifconfig ether 192.168.15.16 IPv6 configuration msh> ifconfig ether inet6 "address" "prefixlen" The following explains how to configure an IPv6 address to 2001:DB8::100 with prefix length 64 on the Ethernet interface. msh> ifconfig ether inet6 2001:DB8::100 64 Netmask configuration msh> ifconfig "interface_name" netmask "address" The following explains how to configure a subnet mask 255.255.255.0 on the Ethernet interface. 165