Ricoh Aficio SP 5210SF Network Guide - Page 168
info, ipp, msh> ipp timeout [30-65535]
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
4. Monitoring and Configuring the Machine msh> ifconfig ether netmask 255.255.255.0 Broadcast address configuration msh> ifconfig "interface_name" broadcast "address" Changing the interface msh> ifconfig "interface" up • When using the optional IEEE 802.11 interface unit, you can specify either Ethernet or IEEE 802.11 interface. • To get the above addresses, contact your network administrator. 4 • Use the default configuration if you cannot obtain setting addresses. • The IP address, subnet mask and broadcast address are the same as that for the Ethernet interface and IEEE 802.11 interface. • TCP/IP configuration is the same for both the Ethernet and IEEE 802.11 interface. If interfaces are changed, the new interface inherits the configuration. • Use "0x" as the initial two letters of a hexadecimal address. info Use the "info" command to display the printer information such as paper tray, output tray, and printer language. Printer information display msh> info • p.196 "Getting Machine Information over the Network" ipp Use the "ipp" command to view and configure the IPP settings. View settings The following command displays the current IPP settings: msh> ipp IPP timeout configuration Specify how many seconds the computer waits before canceling an interrupted print job. The time can be entered between 30 to 65535 seconds. msh> ipp timeout [30-65535] 166