Ricoh Aficio SP 5210SF Network Guide - Page 184
spoolsw, Job Spool setting
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
4. Monitoring and Configuring the Machine Deleting NTP server configuration msh> sntp server clear Interval configuration msh> sntp interval "polling_time" • You can specify the interval at which the printer synchronizes with the operator-specified NTP server. The default is 60 minutes. • The interval can be entered from 0, or between 15 and 10,080 minutes. • If you set 0, the printer synchronizes with the NTP server only when you turn the printer on. After that, the printer does not synchronize with the NTP server. Time-zone configuration 4 msh> sntp timezone "±hour_time" • You can specify the time difference between the printer clock and NTP server clock. The values are between -12:00 and +13:00. • You can only select either the address or host name for the ntp server. spoolsw Use the "spoolsw" command to view and configure the Job Spool settings. You can only specify diprint, trap, lpr, ipp, ftp, sftp, wsprn, and smb (TCP/IP) protocol. View settings The Job Spool setting appears. msh> spoolsw Job Spool setting msh> spoolsw spool {on|off} • Specify "on" to enable Job Spool, or "off" to disable it. Resetting Job spool setting msh> spoolsw clearjob {on|off} • When the printer power is cut during job spooling, this determines whether to reprint the spooled job. Protocol configuration msh> spoolsw diprint {on|off} msh> spoolsw lpr {on|off} msh> spoolsw ipp {on|off} 182