Ricoh Aficio SP 5210SF Network Guide - Page 166
etherconfig, help, hostname, 100h=100 Mbps Half Duplex
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
4. Monitoring and Configuring the Machine etherconfig Use the "etherconfig" command to view and configure the Ethernet parameters. View settings msh> etherconfig Specify Ethernet Speed msh> etherconfig speed {auto|10f|10h|100f|100h} • auto=Auto Select • 10f=10 Mbps Full Duplex 4 • 10h=10 Mbps Half Duplex • 100f=100 Mbps Full Duplex • 100h=100 Mbps Half Duplex The default is "auto". help Use the "help" command to display the available command list and the procedures for using those commands. Command list display msh> help Display of procedure for using commands msh> help "command_name" hostname Use the "hostname" command to change the printer name. View settings msh> hostname IPv4 Configuration msh> hostname "interface_name" name "printer_name" • Enter the printer name using up to 63 alphanumeric characters. • You cannot use a printer name beginning "RNP" (in either upper or lower case). • The Ethernet interface and IEEE 802.11 interface will have the same printer name. • wlan can be specified only when the IEEE 802.11 interface is installed. 164