Ricoh Aficio SP 5210SF Network Guide - Page 163
dns, You can register IPv6 DNS Server address.
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Remote Maintenance Using telnet • You can specify the timeout interval to use when the printer is expecting data from the network. • The default is 300 seconds. • This command functions in conjunction with the "lpr" command. Specifying the number of concurrent connections msh> diprint conn {multi|single} • The above command specifies the number of concurrent diprint connections. Specify "multi" for multiple connections or "single" for a single connection. • The default is "multi". dns 4 Use the "dns" command to configure or display DNS (Domain Name System) settings. View settings The following command displays the current DNS settings: msh> dns IPv4 DNS server configuration The following command enables or disables the IPv4 DNS server address: msh> dns "ID" server "server address" The following command displays a configuration using the IP address 192.168.15.16 on a DNS 1 server: msh> dns 1 server 192.168.15.16 • You can register IPv4 DNS Server address. • You can select an ID number between 1 and 3. You can select up to three ID numbers. • You cannot use "255.255.255.255" as the DNS server address. IPv6 DNS server configuration The following command enables or disables the IPv4 DNS server address: msh> dns "ID" server6 "server address" • You can register IPv6 DNS Server address. • The selectable ID number is between 1 and 3. You can select up to 3 ID. Dynamic DNS function setting msh> dns "interface_name" ddns {on|off} • You can set the dynamic DNS function "active" or "inactive". • {on} means "active" and {off} means "inactive". 161