Ricoh Aficio SP 5210SF Network Guide - Page 42
Wireless LAN, IEEE 802.11 b/g Wireless LAN
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
1. System Settings For details about IEEE 802.1X authentication, see "Configuring IEEE 802.1X". • For details on how to access System Settings, see "Accessing User Tools". 1 • p.20 "Accessing User Tools" • p.313 "Configuring IEEE 802.1X" Wireless LAN This section describes the user tools in the Wireless LAN menu under Interface Settings. [Wireless LAN] is displayed when this machine is installed with the wireless LAN board. Be sure to make all settings simultaneously. Communication Mode Specifies the communication mode of the wireless LAN. Default: [Infrastructure Mode] SSID Setting Specifies SSID to distinguish the access point in [Infrastructure Mode] or [802.11 Ad-hoc Mode]. The characters that can be used are ASCII 0x20-0x7e (32 bytes). If blank is specified in [802.11 Ad-hoc Mode], "ASSID" appears. Ad-hoc Channel Specify the channel to use when [802.11 Ad-hoc Mode] has been selected. Set the channel that matches the type of wireless LAN being used. The channel in use might differ depending on the country. The following channels are available: (mainly Europe and Asia) • IEEE 802.11 a/b/g Wireless LAN Frequency range: 2412 - 2472 MHz (1 - 13 channels) 5180 - 5240 MHz (36, 40, 44 and 48 channels) In some countries, only the following channels are available: • IEEE 802.11 b/g Wireless LAN Frequency range: 2412 - 2462 MHz (1 - 11 channels) Default: [11] 40