Ricoh Aficio SP 5210SF Network Guide - Page 175
set, Prefixlen is a number between 1 and 128.
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Remote Maintenance Using telnet • You cannot register a record that has the same destination and prefix as a registered record. • You cannot register a record that uses "0000:0000:0000:0000:0000:0000:0000:0000" as its destination. Deleting a specified IPv6 destination from routing table msh> route delete6 "destination" "prefixlen" • Specify the IPv6 address to destination and gateway. Display information about a specified IPv6 route information msh> route get6 "destination" • Specify the IPv6 address to destination and gateway. Enabling/disabling a specified IPv6 destination msh> route active6 "destination" "prefixlen[1-128]" {on|off} 4 Route initialization msh> route flush • The maximum number of IPv4 routing tables is 16. • The maximum number of IPv6 routing tables is 2. • Set a gateway address when communicating with devices on an external network. • The same gateway address is shared by all interfaces. • "Prefixlen" is a number between 1 and 128. set Use the "set" command to set the protocol information display "up" or "down". View settings The following command displays the protocol information (up/down). msh> set ipv4 msh> set ipv6 msh> set ipsec msh> set netware • This command is available only when the NetWare is installed. msh> set smb msh> set protocol • When protocol is specified, information about TCP/IP, NetWare and SMB appears. msh> set lpr 173