Ricoh Aficio SP 5210SF Network Guide - Page 76
Connecting to the Gigabit Ethernet Interface (mainly Europe and Asia), This Machine.
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
2. Connecting the Machine 2. Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port. 2 CFL007 3. Connect the other end of the Ethernet interface cable to a network connection device such as a hub. 4. Turn on the main power switch of the machine. 1 CFL014 1. Indicators When 100BASE-TX or 10BASE-T is operating, the green LED is lit and the orange LED flashes. If the machine is not connected to the network, both LEDs are turned off. • For details about how to turn on the main power switch, see "Turning On/Off the Power", About This Machine. • For details about installing the printer driver, see "Preparing the Machine", Printer Reference. Connecting to the Gigabit Ethernet Interface Asia) (mainly Europe and This section describes how to connect the Ethernet interface cable to the Gigabit Ethernet port. Caution: A network interface cable with a ferrite core must be used for RF interference suppression. 74