Ricoh Aficio SP 5210SF Network Guide - Page 182
SNMP TRAP configuration, Specify on to enable, and off to disable.
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
4. Monitoring and Configuring the Machine • The network interface board accepts requests only from hosts that have IPv4, IPv6, and IPX addresses with access types of "read-only" or "read-write". Enter "0" to have the network interface board accept requests from any host without requiring a specific type of access. • Enter a host address to deliver "trap" access type information to. • To specify IPv4 or IPv6, enter "ipv4" or "ipv6" followed by a space, and then the IPv4 or IPv6 address. • To specify IPX/SPX, enter "ipx" followed by a space, the IPX address followed by a decimal, and then the MAC address of the network interface board. sysLocation configuration msh> snmp location "character string" 4 Deleting sysLocation msh> snmp clear location sysContact setting msh> snmp contact "character string" Deleting sysContact msh> snmp clear contact SNMP v1v2 function configuration msh> snmp v1v2 {on|off} • Specify "on" to enable, and "off" to disable. SNMP v3 function configuration msh> snmp v3 {on|off} • Specify "on" to enable, and "off" to disable. SNMP TRAP configuration msh> snmp trap {v1|v2|v3} {on|off} • Specify "on" to enable, and "off" to disable. Remote configuration authorization configuration msh> snmp remote {on|off} • Specify "on" to enable, and "off" to disable the SNMP v1v2 setting. SNMP v3 TRAP configuration display msh> snmp v3trap msh> snmp v3trap [1-5] • If a number from 1 to 5 is entered, settings are displayed for that number only. Configuring a sending address for SNMP v3 TRAP "IPX" is shown only when the NetWare is installed. 180