Ricoh Aficio SP 5210SF Network Guide - Page 216
IEEE 802.11 Card Firmware REV.<version>, IEEE 802.11 Card does NOT support WPA.
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
4. Monitoring and Configuring the Machine Message Problem and solutions Current IPX address The current IP address is . dpsd is disabled. Communication via PictBridge is unavailable because PictBridge is disabled in the security mode. Enable PictBridge in the security mode. DHCP lease time expired. The DHCP lease time has expired. Perform the DHCP discover again. The IP address you have been using is no longer available. DHCP server not found. 4 DHCPv6 server not found. The DHCP server was not found. Make sure that the DHCP is on the network. The DHCPv6 server was not found. Make sure that the DHCPv6 is on the network. disconnected The supplicant has no connection. Duplicate IP=(from ). A conflicting IPv4 or IPv6 address was used. Each IPv4 or IPv6 address must be unique. Check the device address in [MAC address]. Established SPX Connection with PServer, (RPSocket=, connID=) Connection to the print server was established when the remote printer went online. exiting The LPD service has completed and the process is exiting. Exit pserver (In the print server mode) The print server function is disabled because the necessary print server settings have not been made. Frametype= The specified frame type name is for NetWare use. httpd start. The httpd has started. IEEE 802.11 Card does NOT support WPA. A wireless card that does not support WPA is installed. Install a wireless card that supports WPA. IEEE 802.11 Card Firmware REV. Displays the version number of the 802.11 card's firmware. 214