Ricoh Aficio SP 5210SF Network Guide - Page 214
NTP Server: NTP server name, authentication is successful, this message always
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
4. Monitoring and Configuring the Machine Message Problem and solutions add_sess_IPv6: community already defined. The same community name already exists. Use another community name. add_sess_IPX: bad trap addr: community The IPX address (00:00:00:00:00:00) is unavailable when the community access type is TRAP. Specify the host IPX address for the TRAP destination. add_sess_IPX: community already defined. The same community name already exists. Use another community name. 4 adjust time server offset: xx ncsd tells you the timing of the NTP server and sec. whether or not the time system clock is set. NTP Server: NTP server name offset: number of seconds of delay (minus number if a time in advance is specified) Attach FileServer= Connection to the file server as the nearest server has been established. Attach to print queue The system connects to the print queue when the print server goes online. authenticated The supplicant has been authenticated. Authentication was successful. When authentication is successful, this message always appears at the end of the process. authenticating The supplicant is authenticating with the access point (EAP or WPA). authentication mode mismatch The authentication mode of the access point is different from the authentication mode of the supplicant. Use the same authentication mode between the access point and the supplicant. child process exec error ! (process name) The network service failed to start. Turn the machine off and then on. If this does not work, contact your service or sales representative. 212