Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar
Sony PMW200 Manual
View all Sony PMW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony PMW200 manual content summary:
- Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 1
4-425-717-14(1) Solid-State Memory Camcorder PMW-200 PMW-100 Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. © 2012 Sony Corporation - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 2
plug has two blades with one wider than the other. use attachments/accessories specified by the servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply This equipment has been tested and found to comply instruction manual - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 3
), E2 (commercial and light industrial), E3 (urban service or guarantee documents. ATTENTION The electromagnetic fields at the specific frequencies may influence the picture and sound of this camera bateria do mesmo tipo ou equivalente recomendada pela Sony. Bateria Primária Atenção: Verifique as - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 4
No caso de vazamento da pilha, evite o contato com a mesma. Lave qualquer parte do corpo afetado com água abundante. Ocorrendo irritação, procure auxílio médico. Não remova o invólucro da pilha. Mantenha fora do alcance das crianças. Em caso de ingestão procure auxílio médico imediatamente. 4 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 5
Camcorder 12 IR Remote Commander (Supplied 18 On-Screen Indications 19 Direct Menu Operation 20 Power Supply 21 Using a Battery Pack 21 Using AC Power (DC IN Power 22 Turning the Power On/Off 22 Setting "Memory Stick" media/SDHC Cards 30 USB Flash Drives (PMW-200 only 30 Table of Contents 5 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 6
Settings 39 Video Formats 39 ND Filter (PMW-200 only 39 White Balance 40 Markers/Zebra Patterns 41 Gain 41 Electronic Shutter 41 Iris (PMW-200) / Exposure (PMW-100 42 Zoom 43 Focus 43 Steady Shot 44 NightShot (PMW-100 FAT HD Mode Only 48 Rec Review 48 Assignable Buttons 49 Interval - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 7
Playback Status Displays Storing/Retrieving the Setting Data 61 Planning Metadata 62 Thumbnail Screens HD Mode 74 Dividing a Clip (FAT HD Mode Only 75 Showing the Status Screens 76 Camera Status Screen 76 Audio Status Screen 77 Video Status Screen 77 Button/Remote Status Screen 77 Battery/Media - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 8
Settings Overview of the Setup Menus 79 Setup Menu Layers 79 Basic Menu Operations 80 Setup Menu List 82 CAMERA SET Menu 82 AUDIO SET Menu 88 VIDEO SET Menu 90 LCD/VF SET Menu 91 TC/UB SET /Outputs 120 Backup Battery Replacement 122 Troubleshooting 123 Power 123 Recording/Playback 123 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 9
About OpenSSL 129 Specifications 132 General 132 Lens 134 Camera Block 134 Inputs/Outputs 135 Displays 136 Internal Microphone 136 Media Slot Block 136 Package Configuration 136 Optional Accessories 136 Index 138 Table of Contents 9 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 10
and SD recording in DVCAM format The PMW-200/100 records 1920 × 1080, 1440 × 1080, and 1280 × 720 HD images using "MPEG2 Long GOP" codec compression. When recording with UDF, settings of 50 Mbps (in HD422 mode) or 35 Mbps (in HQ mode) are supported. With FAT, settings of 35 Mbps (in HQ mode) or - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 11
the electric shutter speed controls, the PMW-200/100 also has a "shutter angle" control, which is familiar to cinematographers. Picture Profile feature The Picture Profile feature allows the camera operator to easily call up customized picturetonal settings to suit particular shooting conditions. Up - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 12
Overview Part Identification For functions and usage, see the pages in parentheses. Camcorder PMW-200 1 2 3 45 Operation panel on the handle (page 15) PMW-100 Rear connector panel (page 17) 12 7 8 Lens control block 9 Side operation panel Card slot block (page 16) (page 15) (page 16) - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 13
(page 40) 10. FOCUS/ZOOM switch (PMW-100 only) (page 43) 11. Lens operation ring (PMW-100 only) (page 44) 12. Lens cap open/close lever (PMW-200 only) (page 37) Hood fixing screw PMW-100 Attach Insert the hood by aligning it with the mark on the camcorder, then turn the hood clockwise while facing - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 14
groove of the eyecup. EVF large eyecup PMW-100 Attach the EVF large eyecup, aligning it with the groove of the eyecup already installed on the unit. Do not detach the eyecup already installed on the unit. EVF large eyecup (supplied) 2. Rear accessory shoe (page 27) 3. External microphone holder - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 15
19. REC HOLD lever (page 38) Lens control block (PMW-200 only) 10 1. PLAY/PAUSE button (page 67) (previous) button 7. Up/down/left/right buttons, SEL/SET (select/set) button (page 80) 8. MENU (menu display on/ page 42) 4. Iris ring (page 42) 5. ND FILTER select switch (page 39) 6. MACRO switch (page - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 16
11 12 13 14 15 1. FOCUS (focus adjustment mode) switch (PMW-100 only) (page 43) 2. PUSH AF (momentary auto focus) button (PMW-100 only) (page 44) 3. ASSIGN (assignable) 1/2/3/4 buttons (page 49) ZEBRA is set to ASSIGN 1 and PEAKING is set to ASSIGN 2 by default. 4. FULL AUTO button and indicator - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 17
IN to select GENLOCK IN, and set this to OUT to select TC OUT and VIDEO OUT. 8. GENLOCK IN/VIDEO OUT (analog video output) connector (BNC type) (page 105, 111) 9. External device connector (PMW-200 only) (page 30) Controls on the grip 1 2 3 4 5 PMW-200 1. REC REVIEW button (page 38) 2. Power zoom - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 18
Overview 3. Backup battery holder (page 122) IR Remote Commander (Supplied) The buttons without remarks can be used in the same manner as the corresponding buttons on the camcorder. 1 2 1 T PUSH SET SHOTMARK ZOOM 2 W 9 3 THUMBNAIL SUB CLIP 10 4 5 PREV PLAY/PAUSE NEXT . u > FREV - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 19
screen. Remarks [M]: The indication of the items named with this suffix can be independently turned on/off with "Display On/Off" in the LCD/VF SET menu (page 92). [A]: The indication of items named with this suffix can be turned on/off using the assignable buttons to which the corresponding on - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 20
Conversion of the CAMERA SET menu is set to "On". 9. Synchronous recording display [M] (page 105) Displayed when "SDI Rec Control" in the VIDEO SET menu is set to "HD SDI Remote I/F." 10. NightShot mode indication (PMW-100 only) [M][A] (page 45) 11. ND FILTER position (PMW-200 only) [M] Displays - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 21
the battery pack with one that is fully charged. To change the message levels The Low BATT level is set to 10% of full charge, and the BATT Empty level is set to 3% of full charge at the factory. These settings can be changed with "Battery Alarm" (page 98) in the OTHERS menu. Power Supply 21 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 22
of the backup battery while no operation power was being supplied (no battery pack and no DC IN connection), the Initial Setting display will be displayed when you turn the camcorder on at the next opportunity. • While the Initial Setting display is shown, no other operation except turning the power - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 23
) knob (page 15) (PMW-200)/(page 13) (PMW100) enables adjustment to match the eyesight of the operator, who can then view the image clearly through the eyepiece. Adjusting the backlight The brightness of the backlight for the EVF can be switched between High and Low. Set "Backlight" in "EVF - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 24
the IR Remote Commander Before use Before you use the supplied IR Remote Commander for the first time, pull out the using the Setup menu or an assignable button. To activate using the menu Press the MENU button to set the camcorder to Menu mode, select (the OTHERS menu (page 96)) and set "IR - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 25
, refer to the instruction manual for the SxS memory card. SxS, SxS PRO and SxS-1 are trademarks of Sony Corporation. The ExpressCard word into the slot with the SxS label facing right. The ACCESS lamp (page 16) lights in red then changes to green once the memory card is ready for use. 3 Close - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 26
lights camcorder will not be formatted. As a warning message is displayed, replace the card with an appropriate SxS memory card, as per the instructions in the message. Note All the data, including recorded pictures and setup on one SxS memory SET button or the jog dial. 26 Using SxS Memory Cards - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 27
clips to another SxS memory card, using the copy function (page 71) of the camcorder or the dedicated application software (supplied) (page 107). 2 Format the problem SxS memory card, using the format function of this camcorder. 3 Return the necessary clips to the SxS memory card by copy operation - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 28
camcorder, and secure it with the lock lever of the shoe adapter. For details, refer to the instructions supplied with the PHU-220R. Connecting the PHU connection cable 1 Set POWER indicator of the PHU-220R lights in green. Subsequently, the ACCESS lamp of the camcorder lights in red then changes to - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 29
dial, then press the SEL/ SET button or the jog dial. -EX1 Media Adaptor, refer to the instruction manual supplied with it. Notes • High-speed playback camcorder, formatting is required. An XQD memory card to be used with this camcorder must be formatted using the format function of this camcorder - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 30
PRO-HG Duo" HX series Usable SDHC card Class 10 SDHC card For details on use of the MEAD-MS01/SD01 Media Adaptor, refer to the operating instructions supplied "Storing/Retrieving the Setting Data" (page 61) The following Sony USB flash drives are recommended for use with this camcorder. • USM-Q - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 31
buttons or the jog dial, select "Execute," then press the SEL/SET button or the jog dial. When formatting is completed, the message "Format USB Memory Done" is displayed. The \MSSONY\PRO\XDCAM\MEMDISC folder and the \General\Sony\Planning folder are automatically created in the drive. If the format - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 32
CBK-WA01, refer to the Mounting Instructions and Operating Instructions supplied with the CBK-WA01. Making a Wi-Fi connection between a computer and the camcorder enables you to do the following. Send planning metadata created on a computer to the camcorder, and set names of clips to shoot and shot - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 33
the Operating Instructions supplied with the CBK-WA01 to make settings on the computer. 2 Start a connection on the computer. 3 Set OTHERS >Wi-Fi >Wi-Fi to [Enable] in the setup menu. 4 Set OTHERS >Wi-Fi >Scan Networks to [Execute] and press the SEL/SET button or the jog dial. The camcorder starts - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 34
to make a connection by accessing a network connection started on the camcorder from the computer. To terminate the connection Terminate the connection on the computer. To revert to the default settings (reset) If you have trouble making a connection, or you want to start over, you can reset - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 35
on the browser you are using. To display the Web menu 1 Launch a browser on the computer, and navigate to "http:// - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 36
settings are required on both the device and camcorder. Camcorder settings 1 Set OTHERS > Wi-Fi > Wi-Fi to [Enable] in the setup menu. 2 Set OTHERS > Wi-Fi > Wi-Fi Remote to [On] in the setup menu. Device settings Set instructions supplied with the smartphone/tablet. 36 Using a Wi-Fi Adapter (PMW- - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 37
cap built in the lens hood. PMW-100 Remove the lens cap. 5 Set the power switch to the ON position. The recording screen is displayed. When using the remote commander, activate the remote control mode (page 24). Note When you hold the camcorder by the grip, support it from underneath with your left - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 38
tally lamps light and recording begins Review) 9 Press the REC REVIEW button. The Rec Review camcorder, a clip name is automatically generated according to the method selected with "Auto Naming" in "Clip" (page 100) in the OTHERS menu. The default setting of "Auto Naming" is "Plan." With this setting - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 39
99) in the OTHERS menu. When you change the menu setting, the camcorder automatically restarts, executing the switching. Note HD/SD switching is . ND Filter (PMW-200 only) ND filters are available for keeping the aperture in a proper range. 2: 1/64ND 1: 1/8ND Changing Basic Settings 39 Recording - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 40
B mode. 2 Place a white subject under the same lighting condition and zoom in on it so that a white area is obtained on the screen. 3 Adjust the brightness. Adjust Iris (PMW-200) or Exposure (PMW100) as instructed in "Adjusting the brightness manually" (page 42) below. 4 Press the WHITE BAL button - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 41
is set to "On," auto white balance cannot be performed. (PMW-100 only) • If auto white balance adjustment fails, an error message is displayed on the screen for approximately 3 seconds. If the error message continues to be displayed after several attempts, consult your Sony service representative - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 42
opening. PMW-100: When Full Auto mode is set to OFF, set "Exposure" (page 87) in the CAMERA SET menu to "Manual" to use Manual mode. When Manual mode is set, rotate the EXPOSURE dial (page 13) to adjust the brightness. (Rotate the dial clockwise while facing the front of the camcorder to increase - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 43
) when you press the DISPLAY button. The supplied IR Remote Commander and optional lens remote control unit (PMW-200 only) can also be used. PMW-200: Setting the ZOOM switch on the bottom of this unit to the SERVO position sets to power zoom mode. PMW-100: You can always operate the power zoom. The - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 44
ring forward (to lens hood side), then set the FOCUS switch (page 15) to MANUAL. In this mode, expanded focus function, peaking function, one-push auto focus function and the MF Assist function are activated. Rotate the lens operation ring (PMW-100) or focus ring (PMW-200) while looking at the LCD - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 45
NightShot (PMW-100 only) NightShot is convenient for recording in dark areas. Set "Setting" in "NightShot" (page 87) in the CAMERA SET menu to "On." You can also assign NightShot to an assignable button (page 49) to change value of "Setting" to "On"/"Off." To emit an infrared line Set "NS Light" in - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 46
(CH-1/CH-2) (page 16) to EXT. 5 Set the corresponding input (LINE/ MIC/MIC+48V) switch (CH-1/CH-2) (page 14) according to the connected microphone. MIC: For a microphone that requires no power supply MIC +48V: For a microphone that requires +48V power supply (such as the ECM673) Adjusting the Audio - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 47
MANUAL and adjust the audio recording levels by turning the AUDIO LEVEL knobs (page 16). Set the controls to 5 for the reference setting (0 dB). Setting to 10 maximizes the level (+12 dB), and setting in "Color Bars" in the CAMERA SET menu. Notes • The color efficiency. The camcorder permits you to - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 48
the clip from being deleted or divided inadvertently. You can also set the camcorder to display only clips with the OK mark on the thumbnail screen clip is displayed, depending on the "Rec Review" setting (page 85) in the CAMERA SET menu. Rec Review is terminated at the end of the clip, resuming - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 49
Setup and PICTURE PROFILE menus cannot be operated during Rec Review. Assignable Buttons The camcorder has assignable buttons (five for PMW-200, four for PMW-100 set to other than "HQ mode/23.98P." Preparatory settings Before starting Interval Recording, make the necessary settings in the CAMERA SET - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 50
necessary settings in the CAMERA SET menu (page 85) in advance. Performing Frame Recording When the preparatory settings are completed, you can start recording. 1 Press the REC START/STOP button. When the number of frames you specified with the menu are recorded, the camcorder automatically enters - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 51
Motion When the camcorder is in UDF HD Mode or FAT HD Mode and the video format (page 99) is set to one of the following settings, you can set the recording frame rate and playback frame rate to different values. NTSC Area HD422 50/1080/29.97P, HD422 50/1080/23.98P, HD422 50/720/59.94P - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 52
to "Off." • Slow & Quick Motion mode cannot be used while recording, or while using Recording Review or Freeze Mix. • Slow & Quick Motion mode cannot be used when "SLS/EX SLS" (page 83) in the CAMERA SET menu is set to other than OFF. • Audio cannot be recorded when the recording and playback frame - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 53
properly. Once the adjustment begins, do not touch the camcorder body or lens until it ends. • When "Setting" of the "EX Slow Shutter" of the CAMERA SET menu is "On," be sure to set it to "Off" before starting the adjustment. • Be careful that no light source, such as a lamp, the sun, or a bright - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 54
(page 16). The PICTURE PROFILE menu is displayed. 2 Using the up/down/left/right buttons or the jog dial, select "SEL," then press the SEL/SET button or the jog dial. 3 Select the number of the picture profile to use from the list, then press the SEL - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 55
(Unselectable when "Color Area Indication1) Correction" is selected in the On / Off Multi Matrix mode: PMW- 200 only) Color Detection2) Execute/Cancel Set to "On" to enable the multi-matrix correction, which allows specific colors to be selected for saturation correction in a 16-axis hue space - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 56
Set to "On" to enable the color phase adjustment for a specific area. (Simultaneous adjustment of multiple areas is not allowed. You can adjust it for one Phase 0 to 359 (130) Manually adjust the center color for the area targeted for Color Correction. White Setting the white balance offset and the - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 57
it to a higher level, less noise may be seen, as fine elements of details are deleted leaving only high-level elements. When you set it to a lower level, fine elements are applied while increasing noise. H/V Ratio -99 to +99 (±0) Adjust the horizontal-to-vertical ratio of detail elements. A higher - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 58
to the sections above the knee point). Skin Tone Detail Adjusting the details to be applied to the areas of a specific color phase Setting On / Off Set to "On" to enable the detail level adjustment for specific color-phase areas. The detail level is uniform over the entire picture with the Off - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 59
in slow shutter mode • When EX SLS is active Auto Knee On / Off Set to "On" to automatically set the best knee conditions according to the luminance level of the picture. With "Off" the knee conditions can be manually adjusted independently of the luminance level of the picture. Point 50 to 109 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 60
Low Key SAT Adjusting the low key saturation -99 to +99 (±0) Adjust the level of the low Indication "On"/"Off" setting is common to all A gamma table equivalent to an SD camcorder. STD2: A gamma table with ×4.5 into 100% output. HG2: A gamma table for turning 460% D-range input into 100% output - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 61
or a USB flash drive (PMW-200 only). By retrieving the stored setup file, the proper setup condition can be immediately obtained. Note Values for "Clock Set" and "Hours Meter" in the OTHERS menu are not stored. Storing the Setup file To use an SxS memory card Only one setup file-designated with the - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 62
displayed, indicating that the camcorder settings have been changed according to the setup file. To use a USB flash drive (PMW-200 only, in UDF mode if the directory where they are located on the USB flash drive (General/Sony/Planning) contains 512 or more files. 2 Using the up/down/left/right - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 63
user name and password, then click OK. User name: admin Password: (your unit's model in lowercase; pmw-100 or pmw-200, as appropriate) Clearing the loaded planning metadata To clear the planning data loaded in the camcorder ="http:// xmlns.sony.net/pro/metadata/ planningmetadata"spassignId - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 64
3 indicates a carriage return. Note If a name string contains even one non-ASCII character, the maximum length of that string is limited to ="1.0"spencoding=" UTF-8"?>3 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 65
yellow) The icon of the current SxS memory card is highlighted, shading the nonselected one. (If the card is write-protected, a lock icon is displayed to the from the clip. When recording, the first frame of a clip is automatically set as the index frame. This frame can be adjusted (page 74). Below - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 66
all operations and indications may be available, because the clip may have been added manually to the SxS file via a computer, etc., and there is no management . You can select the type of flag to display with "Filter Clips" in "Clip" (page 100) in the OTHERS menu. OK-Clip thumbnail screen Only the - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 67
no./total number of clips This is displayed for FAT. It is also displayed for UDF if "Find Mode" in "Clip" (page 100) in the OTHERS menu is set to "Clip." 6. Clip no./total number of clips, essence mark no./total number of essence marks This is displayed for UDF if "Find - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 68
audio channel(s) to be monitored with "Audio Output" (page 89) in the AUDIO SET menu. Cueing Up To start playback from the top of the first clip Press Operation menu pops up on the screens as shown below when you press the SET/SEL button or the jog dial. Clip Operation Menus Thumbnail screen (page - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 69
Operations of the Clip Operation Menus Use the up/down/left/right buttons or the jog dial to select a menu item, then press the SEL/SET button or the jog dial. Pressing the CANCEL button restores the previous condition. Selecting "CANCEL" from a Clip Operation menu turns the Clip Operation menu off - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 70
displayed. To check the non-displayed block of the name, press the jog dial or the SEL/SET button to display the entire clip name (LongDisplay mode). Press the jog dial or the SEL/ SET button again to cancel Long-Display mode. Long-Display mode is also canceled by switching to the - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 71
FAT HD Mode, you can set the camcorder to display only the necessary When using UDF, you cannot copy a file 1000 times or more if clips with the same . Replace the SxS memory card with one with sufficient space. • When copying Copying clips collectively By using the Setup menu, you can copy clips on - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 72
setting before performing the delete operation. Deleting clips collectively By using the Setup menu, you can delete clips from an SxS memory card collectively. Select "All Clips DEL" in "Clip" (page 100 each frame. If the frame has multiple markings, one of the icons is displayed, in the priority - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 73
SD Mode. Displaying the SHOT MARK Screen (UDF and FAT HD Mode) When one or more shot marks or recording start marks are recorded for a single clip, on the screen. 1 Select a clip on the thumbnail screen, then press the SEL/SET button or the jog dial. 2 Select ALL MARK, SHOT MARK1, SHOT MARK2, or - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 74
Move the cursor to the first/last frame When the cursor is at a user-designated position, press the F REV and PREV buttons simultaneously to move the cursor CLIP screen (page 72) or the SHOT MARK screen (page 73). Select "SET INDEX PIC" from the Clip Operation menu. Note Even if you specify a frame - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 75
Playback Dividing a Clip (FAT HD Mode Only) In FAT HD Mode, you can divide a clip into two different clips at the frame you select on the EXPAND CLIP screen (page 72) or the SHOT MARK screen (page 73). Select "DIVIDE CLIP" from the Clip Operation menu. The first 4 characters of the original clip - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 76
white can be changed using the PICTURE PROFILE menu. Gain: GAIN switch settings The gain values of the positions L, M, and H of the GAIN switch assigned in the CAMERA SET menu are displayed. Handle Zoom Speed: Handle zoom speed settings The speed values assigned to each position of the Zoom Speed - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 77
CH" in "Audio Output" in the AUDIO SET menu. Wind Filter The "On"/"Off" setting of Wind Filter is displayed to the right of each input source. Wind Filter settings can be made from "Wind Filter CH1" to "Wind Filter CH4" in "Audio Input" in the AUDIO SET menu. Video Status Screen Video Format Video - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 78
A/Media B: Remaining space, available recording time, and estimated service life (rewriting limit) The remaining space of the SxS memory SxS memory card which supports the life value indication. It indicates the estimated remaining usable period of the card (virgin status as 100%). If an alarm is - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 79
and user bits. OTHERS menu: For setting other items. Setup Menu Layers MENU CAMERA SET Gain Setup Shutter SLS/EX SLS (PMW-100 only) EX Slow Shutter (PMW200 only) MF Assist Color Bars Flicker Reduce Zoom Speed Zoom Transition Interval Rec Frame Rec Clip Cont.Rec P.Cache Rec S&Q Motion Rec Review - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 80
Users Bit TC Format All Reset Camera Data Time Zone Clock Set Language Assign Button Tally Hours Meter IR Remote Battery Alarm Battery INFO Genlock Direct Menu Trigger Mode System Clip Copy All Format Media Plan.Metadata Network (PMW-200 only) Wi-Fi (PMW-200 only) Version Version (Lens) (PMW-100 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 81
cursor to the icon of the menu you wish to set, then push the jog dial or SEL/ SET button to select that menu. • The menu item selection area can show 7 lines at maximum. When all the selectable items cannot be displayed at one time, you can scroll the display up or down - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 82
. CAMERA SET Menu CAMERA SET Menu items Subitems and setting values Contents Gain Setup Assigning gain levels to the three GAIN switch positions Low set. SLS (Slow Shutter mode): The shutter speed is specified in PMW-100: the number of accumulated frames. Unselectable when Shutter Speed Set - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 83
CAMERA SET Menu items Subitems and setting values Contents SLS/EX SLS Setting (PMW-100 only) OFF / 2 / 3 / 4 / 5 / 6 / 7 / 8 / Setting the Slow 16 / 32 / 64 Shutter mode/ Supersensitized Slow Shutter mode Set the number of cached frames. Notes • This cannot be set while recording or while - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 84
under lighting that may cause flicker, "Mode" should be set to "On.") Set to the power supply frequency of the light source causing flicker. Set the with the zoom speed switch set to L. Note Remote 1 to 99 (50) Zooming may not operate smoothly if you select a low speed. Set the speed of zooming - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 85
video format. "EX Slow Shutter" mode and 720 59.94p/720 is set (PMW-200 29.97p/720 23.98p.) only). 1 to 50 (When using 1080 25p.) (NTSC : 30, PAL : 25) Rec Review Setting the playback time for Rec-Review 3 sec / 10 sec / Clip Set the time to play the last recorded clip using the RecReview - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 86
stop further closed -1.0: Approx. one stop further closed Mode Backlight / Standard / Spotlight Set the auto iris (PMW-200)/auto exposure (PMW-100) control mode in TLCS. Backlight: Backlight mode to reduce darkening of the center subject against lights Standard: Standard mode Spotlight: Spotlight - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 87
Setting the NS Light NightShot function Auto / Off Exposure (PMW-100 only) Setting the Exposure function Auto / Manual Auto Black Bal. Setting the automatic black balance Execute / Cancel • This cannot be set while recording, while the color bars are displayed or while using Recording Review - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 88
-18dB / -16dB / -12dB / EBUL Select the 1kHz test signal output level. Limiter Mode Off / -6 db / -9 db / -12 db / -15 db / -17 db Select whether to activate the limiter when a loud signal is input while the AUDIO SELECT switch is set to MANU (manual). AGC Spec Select the audio input level AGC - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 89
setting is applied. Turn the 1-kHz reference tone signal on/off. Turn the wind filter for CH1 on/off. Turn the wind filter for CH2 on/off. Turn the wind filter for CH3 on/off. Turn the wind filter set to "CH-3/CH-4" Select audio output channels from either channels 1 and 2 or channels 3 and 4. Set - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 90
SET Menu VIDEO SET Menu items Setting values Contents Input Source Select Setting the input source Camera / i.LINK Select video and audio signal for the input source. Camera: Camera displayed regardless of the setting of this item. Menu Configuration and Detailed Settings 90 Setup Menu List - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 91
HD422 50/1080/23.98P, HD420 HQ/1080/ 23.98P, HD422 50/720/23.98P, HD420 HQ/720/23.98P, or the video format for FAT HD Mode is HQ 1920/23.98P or HQ 1440/23.98P. To turn the function to enabling recording synchronized with this camcorder Setting the viewfinder Backlight High / Low On Set the - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 92
30% / 20% / 10% / 0% Guide Frame On / Off Turn the guide frame marker on/off. Zebra Setting the zebra pattern [M] Setting On / Off Zebra Select 1 / 2 is 100%) for a video level over 100%. Both: To display both zebra 1 and zebra 2 Zebra1 Level 50 to 107 (70) Set the Settings 92 Setup Menu List - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 93
On / Off Turn the Picture Profile indication on/off. Filter Position (PMW-200 only) Turn the ND filter setting indication on/off. On / Off Iris Position (PMW-200 only) On / Off Turn the iris setting indication on/off. Exposure Position (PMW-100 only) On / Off Turn the exposure indication on - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 94
during playback. Generator: To output the timecode generator value during recording or playback. Set the user bit mode. Fix: To use a desired fixed value as the user bits Date: To use the current date Set the user bits to a desired value. Menu Configuration and Detailed Settings 94 Setup Menu List - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 95
SET Menu items TC Format Setting the time code format Subitems and setting values DF / NDF Contents Set setting HD422 50/1080/ 23.98P HD420 HQ/1080/ 23.98P HD422 50/720/ 23.98P 50i 50P 25P Frame setting in "Setting" is VIDEO SET menu SET menu, fields are created in which overlapping - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 96
"Execute" to reset the camcorder to the factory status. When you select "Execute" to store the setting values to an SxS memory card, the setup file is stored to one of the following directories. For UDF: /General/Sony/PRO/CAMERA/XDCAM/ PMW_xxx/ For FAT: /SONY/PRO/CAMERA/XDCAM_EX/PMW_xxx/ Select - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 97
between "Auto"/"Manual" Color Bars: For switching between the color bar and camera signal One Push AE (PMW-100 only): For executing the One Push AE function One Push Auto Iris (PMW-200 only): For executing the One Push iris function. Menu Configuration and Detailed Settings Setup Menu List - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 98
control operations from the supplied IR Remote Commander. Note The setting automatically returns to "Off" when the camcorder is turned off. Battery Alarm Low BATT Setting the low 5% / 10% / 15% / ... / 45% / power alarm 50% Set the battery level at which the Low BATT warning is generated - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 99
setup ON/OFF setting. NTSC Area: Setup ON NTSC(J) Area: Setup OFF PAL Area: Setup OFF Note UDF/FAT UDF / FAT HD/SD HD / SD Format The default setting is NTSC(J) Country: NTSC Area/NTSC(J) • Bit rate Area Area UDF: HD422 50 or HD420 HD422 50/1080/59.94i HQ 1920/59.94i HQ HD420 HQ/1080/59. - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 100
by "Title Prefix" is used.) Title Prefix Call the Character Set screen to set the title part (4 to 46 nnn_ (nnn=least three digits of flag) to filter displayed clips. (UDF only) Select "Execute" to protect all clips. (UDF only) Menu Configuration and Detailed Settings 100 Setup Menu List - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 101
a file, select "Load" then "Execute" for loading. Notes Load/USB (PMW-200, in UDF mode only) Execute/Cancel • The file list displays up directory where they are located in the SxS memory card (General/Sony/ Planning) contains 512 or more files. • After you start Settings Setup Menu List 101 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 102
Cancel Select "Execute" to clear the planning metadata loaded in the camcorder. Clip Name Disp Select the display mode of the clip name specified in planning Title1 (ASCII) / Title2 (UTF-8) metadata. Note Network (PMW-200 only) Setting for network connections Note The CBK-WA01 Wi-Fi Adapter is - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 103
OTHERS Menu items Wi-Fi (PMW-200 only) Setting for Wi-Fi connection Note The CBK-WA01 Wi-Fi Adapter is required. Subitems and setting values Contents MAC Address Display the MAC address. Net Config Reset Execute / Cancel Reset the "Network" settings to the preset values. Select "Execute" to - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 104
setting values Version Vx.xx (PMW-200) Showing the Vx.xx_1 (PMW-100) version of this unit Version (Lens) Vx.xx (PMW-100 only) Showing the version of the lens Version Up Updating this unit Execute / Cancel Contents The current software version of the camcorder Settings 104 Setup Menu List - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 105
cable for the monitor to be connected. Output signal from the camcorder can be recorded when a recording device is connected. Regardless of in the VIDEO SET menu. To set the input, select "i.LINK" in "Input Source Select" (page 90) in the VIDEO SET menu. A monitor or VTR that supports i.LINK can be - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 106
following URL: http://www.sony.net/SxS-Support/ With a Windows computer, check that a Removable Disk appears in My Computer. This indicates normal status. With a Macintosh computer, an icon is displayed on the menu bar. To connect with a USB cable When you connect the camcorder or the SBACUS10 SxS - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 107
check the connection to the camcorder 1 Set the power switch to ON to turn on the camcorder. A message prompting you to -Disconnecting the USB cable • Operation is not guaranteed with all computers. • Use the supplied USB cable for connection. Removing an SxS memory card Windows 1. Click on the icon - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 108
conforming to the HDV format is also enabled. Notes • DVCAM streams cannot be recorded with the camcorder. • Use the i.LINK (HDV/DV) connector only for one-toone i.LINK connection. • When you change a setting which affects output signals from the i.LINK (HDV/DV) connector, such as "System" in the - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 109
picture may not be displayed on the computer screen, depending on the nonlinear editing software in use. Setting on this camcorder Set "SDI/HDMI/i.LINK I/O Select" (page 90) in the VIDEO SET menu to "HDV" or "DVCAM." Recording External Input Signals The HDV stream input from a device connected via - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 110
in synchronization with a specific reference signal, and the timecode can be matched among all the units. Aligning the phase of the video signal (Genlock) Genlock operation is enabled by supplying a reference signal to the GENLOCK IN connector (page 17) of the camcorder. Valid reference signals - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 111
HQ/720/59.94P, HD422 50/720/50P, HD420 HQ/720/50P FAT: HQ 1280/59.94P, HQ 1280/50P • If the reference signal is unstable, genlock is not possible. • The subcarrier is not synchronized. Synchronizing the timecode of your camcorder with that of another unit Set the unit that supplies the timecode to - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 112
severe shock, the accessory shoe may be damaged. In such a case, stop using it and contact your dealer or a Sony service representative. Do not cover the unit while operating Putting a cloth, for example, over the unit can cause excessive internal heat build-up. After use Always set the power switch - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 113
the lens of the camcorder. About the LCD very rarely, one or more pixels specific to CMOS image sensors The following phenomena that may appear in images are specific recommend to set the electronic shutter speed to 1/100 sec. beam or a light source that quickly format -Rec Review -Starting playback - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 114
depending on the settings of the setup menu and format of the clip being played. The output format is converted when using the settings in the following HD422 50/720/50P HD420 HQ/720/50P HQ 1280/50P HD422 50/720/25P HQ 1280/25P Output format Setting of "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 115
HQ 1920/23.98P HQ 1440/23.98P (23.98P Output:59.94i (2-3 Pull Down)) HD422 50/720/50P HD420 HQ/720/50P HQ 1280/50P Output format Setting of "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET menu HD SDI & HD HDMI SD SDI & SD HDMI i 1920×1080/59.94i 1) SD/59 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 116
depending on the settings of the setup menu and format of the clip being played. The output format is converted when using the settings in the following HD422 50/720/50P HD420 HQ/720/50P HQ 1280/50P HD422 50/720/25P HQ 1280/25P Output format Setting of "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 117
before output. When you play clips recorded with the PAL system while the "Country" is set to "NTSC Area/NTSC(J) Area." Some frames may be repeated due to frame rate conversion. Playback clip video format HD-Y HD422 50/1080/50i 1920×1080/60i HD420 HQ/1080/50i HQ 1920/50i HQ 1440 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 118
When you play clips recorded with the NTSC system while the "Country" is set to "PAL Area." Some frames may be deleted due to frame rate conversion. Playback clip video format HD-Y HD422 50/1080/59.94i 1920×1080/49.95i HD420 HQ/1080/59.94i HQ 1920/59.94i HQ 1440/59 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 119
signals from the i.LINK I/O connector are output in the following formats depending on the settings of the setup menu and format of the clip being played. Note When "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET menu is set to "HD SDI & HD HDMI," "SD SDI & SD HDMI i," or "SD HDMI P," signals are - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 120
Limitations of Inputs/Outputs The outputs from the camcorder are limited by the menu settings as follows: ×: no signal Menu setting System UDF/ HD/SD FAT UDF HD FAT HD/HQ HD/SP SDI/HDMI/ i.LINK I/O Select HD SDI & HD HDMI SD SDI & SD HDMI i HD - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 121
Menu setting System UDF/ HD/SD FAT UDF SD FAT SDI/HDMI/ i.LINK I/O Select HD SDI & HD HDMI SD SDI & SD HDMI i HD HDMI & HDV SD HDMI i & - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 122
uses a backup battery to retain various setting data. A lithium battery (CR2032) for backup is mounted in the camcorder at the factory. The backup battery retains the date, time, and timecode in Free Run mode even when no operating power is being supplied. Service life of the backup battery When the - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 123
Troubleshooting Power Symptoms Cause Remedy The camcorder does not No battery pack is mounted and no power on when you set power is supplied to the DC IN the power switch to ON. connector. Mount a battery pack (page 21) or connect to AC power using the BC-U1 or - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 124
Devices Symptoms Cause The equipment connected It sometimes takes time for the to the camcorder via an connected equipment to recognize i.LINK connection does the operation. not react • Turn the power off, and connect the cable again. • Change the i.LINK cable. Appendices 124 Troubleshooting - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 125
service personnel. (If power cannot be turned off by setting the power switch to OFF, remove both the battery pack or the DC IN source.) Warning Indications When one of the following indications is generated, follow the message to clear the problem. Warning indication on LCD/EVF Media Near Full - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 126
camcorder. Replace it with another card. This is an advanced notice that the camcorder camcorder. Replace it with another card or format it with this camcorder the camcorder, or as the "Format" setting is different from the signal service life. Make a backup copy and replace the card with another one - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 127
The memory card is write-protected. Remove the card from the slot and remove the writeprotection. A memory card that cannot be used with the camcorder is inserted. Replace the card in the respective slot. Copying of a general file failed. Retry copying. A memory card with an different file system is - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 128
under the conditions of the GPL version 2. The source code is provided on the internet. Use the following URL and follow the download instructions. http://www.sony.net/Products/Linux/common/ search.html We would prefer that you do not contact us about the contents of the source code. 128 Licenses - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 129
ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, * OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN * CONTRACT - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 130
used are not cryptographic * related :-). * 4. If you include any Windows specific * code (or a derivative thereof) from * the apps directory (application * (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 131
* OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * The licence and distribution terms for * any publically available version or * derivative of this code cannot be * changed. i.e. this code cannot simply * be copied and put - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 132
Specifications General Mass PMW-200 Approx. 2.3 kg (5 lb 1.1 oz) (Camcorder only) Approx. 2.7 kg (5 lb 15 oz) (With lens hood (1), eyecup (1), battery pack BPU30 (1), SxS memory card (1)) PMW-100 Approx. 1.5 kg (3 lb 4.9 oz) (Camcorder ) UDF HD422 mode: MPEG-2 422P@HL, 50Mbps / CBR - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 133
VBR SP 1440 mode: MPEG-2 MP@H-14, 25 Mbps / CBR DVCAM mode: DVCAM Recording format (audio) UDF HD422 mode: LPCM (24-bit, 48 kHz, 4 channels) Other modes: LPCM (16-bit, 48 kHz, 4 (32GB): Approx. 100 minutes When using SBP-16 (16GB): Approx. 50 minutes SP 1440 mode Appendices Specifications 133 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 134
to F16 and C (close) Picture stabilizing function ON/OFF possible, shift-lens system 134 Specifications Filter thread M 77 mm, pitch 0.75 mm Macro ON/OFF possible PMW-100 Lens mount Fixed type Zoom ratio 10×, power/manual switchable Focal length 5.4 mm ~ 54 mm (equivalent to 40 mm ~ 400 mm on a 35 - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 135
12 lx (typical) (1920 × 1080/59.94i, F1.9, +18 dB, 64-frame accumulation) PMW-100: 0.40 lx (typical) (1920 × 1080/59.94i, F1.8, +18 dB, 64-frame remote controller) connector (PMW-200 only) 8-pin round (1) External device connector (PMW-200 only) 4-pin (Type A) (1) Specifications 135 Appendices - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 136
for backup) (1) This is pre-installed to the camcorder. Lithium battery (CR2025 for the IR Remote Commander) (1) This is pre-installed to the IR Remote Commander. CD-ROM 136 Specifications Operating instructions in PDF (1) Operating Instructions (1) Software Downloads When the unit is used with - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 137
* To attach accessories to the rear accessory shoe, use the optional cold shoe kit (part no.: X-2546633-1). Design and specifications are subject to change without notice. Notes • Always make a test recording, and verify that it was recorded successfully. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 138
Black Gamma 60 built-in speaker 68 built-in stereo microphones 46 Button/Remote Status Screen 77 138 Index C Camera Data 96 CAMERA SET Menu 82 CAMERA Status Screen 76 Charge Count 78 Clip 38, 67, 100, 106 Clip Cont. Rec 50, 85 Clip Name Disp 102 Clip name 38 Clip Operation menu 68 Clock - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 139
button 37 Full Auto mode 37 Full MF mode 43 G Gain 41 Gain Setup 82 Gamma 59 Genlock 98 GENLOCK IN connector 110 H handle ZOOM button 43 48 L Language 96 LCD 23, 91 LCD/VF SET Menu 91 Lens hood 13 LENS REMOTE connector 43 Limitations of Inputs/Outputs 120 Low Key SAT 60 M Macro mode 44 MACRO switch - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 140
55 R REC HOLD lever 38 Rec Review 48, 85 REC REVIEW button 38 REC START/STOP button 38 /i.LINK I/O Select 90 SEL/SET buttons 80 SEL/SET dial 80 Setting Data 61 Setup Menus 79, 82 Shockless White Users Bit 45, 94 UTC 22 V Version 104 Version Up 104 Video Formats 39 VIDEO OUT connector 105 VIDEO SET - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 141
Wide Conversion 44, 87 wide-conversion lens 44 Wi-Fi 103 Wi-Fi Adapter 32 Wi-Fi remote commander 35 X XQD Memory Cards 29 Z Zebra 41, 92 zebra pattern 41 Zoom 43 Zoom Speed 43, 84 Zoom Transition 84 Index 141 Appendices - Sony PMW200 | User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 142
4-425-717-
14
(1)
Solid-State Memory
Camcorder
PMW-200
PMW-100
© 2012 Sony Corporation
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.