Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 107
Removing an SxS memory card, Using the application software, Using a nonlinear editing system
View all Sony PMW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
To check the connection to the camcorder 1 Set the power switch to ON to turn on the camcorder. A message prompting you to confirm that you wish to enable the USB connection is displayed on the LCD monitor/EVF screen. Note This message will not be displayed while another confirmation message or in-progress message (e.g., for formatting or restoration of an SxS memory card) is shown on the screen. It appears when formatting or restoration is completed. The message is also not displayed while the CLIP INFO screen is shown on the screen. It appears when an operation on the CLIP INFO screen is completed or you return to the thumbnail screen. 2 Select "Execute" by using the up/down/ left/right buttons or the jog dial. 3 With Windows, check that the memory card is displayed as a removable disk in My Computer. With Macintosh, check that a "NO NAME" or "Untitled" folder was created on the desktop. (The Macintosh folder name can be changed.) Notes • The following operations must be eliminated when the access lamp is lit in red. -Turning the power off or disconnecting the power cord -Removing the SxS memory card -Disconnecting the USB cable • Operation is not guaranteed with all computers. • Use the supplied USB cable for connection. Removing an SxS memory card Windows 1. Click on the icon of "Safely Remove Hardware" on the task bar of the computer. 2. Select "Safely remove SxS Memory Card - Drive(X:)" from the displayed menu. 3. Check that the Safe To Remove Hardware message appears then remove the card. Macintosh Drag the SxS memory card icon on the desktop to Trash. If the SxS memory card icon is located on Finder, click on the eject icon on its side. Note Do not select "Card Power Off" from the SxS memory card icon displayed on the menu bar. Using the application software To copy clips to the local disk of your computer, the dedicated application software must be downloaded and installed on your computer. For details, see "Software Downloads" (page 136). Although the data regarding recorded materials are stored over multiple files and folders, you can easily handle the clips without considering such data and directory structure by using the dedicated application software. Note If you operate, e.g. copy the clips on the SxS memory card by using the Explorer (Windows) or Finder (Macintosh), the subsidiary data contained by the clips may not be maintained. Using a nonlinear editing system For a nonlinear editing system, optional editing software that corresponds to the recording formats used with this camcorder is required. Store the clips to be edited on the HDD of your computer in advance, using the dedicated application software. Connecting External Devices Operating Clips With a Computer 107