Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 25
Using SxS Memory Cards, Inserting/Removing an SxS Memory Card, Inserting/Removing an SxS, Memory Card
View all Sony PMW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Preparations Using SxS Memory Cards This camcorder records audio and video on SxS memory cards (optional) inserted in the card slots. About SxS Memory Cards Usable SxS memory cards Use the following Sony-made SxS memory cards. Operations are not guaranteed with memory cards other than the following cards. SxS PRO series SxS-1 series These cards comply with the ExpressCard standard. For details on using SxS memory cards and usagerelated precautions, refer to the instruction manual for the SxS memory card. SxS, SxS PRO and SxS-1 are trademarks of Sony Corporation. The ExpressCard word mark and logo are owned by Personal Computer Memory Card International Association (PCMCIA) and are licensed to Sony Corporation. All other trademarks are the property of their respective owners. Inserting/Removing an SxS Memory Card Inserting an SxS memory card 1 Open the cover of the card slot block (page 16). 2 Insert the SxS memory card into the slot with the SxS label facing right. The ACCESS lamp (page 16) lights in red then changes to green once the memory card is ready for use. 3 Close the cover. Status indications by the ACCESS lamps Card slots A and B are accompanied by the respective ACCESS lamps to indicate their statuses. Lamp Lights in red Lights in green Off Slot statuses Accessing the loaded SxS memory card (writing/reading data) Standby (ready for recording or playback using the loaded SxS memory card) • No SxS memory card is loaded. • The loaded card is invalid. • An SxS memory card is loaded, but another slot is active. Removing an SxS memory card 1 Open the cover of the card slot block, press the EJECT button (page 16), then pull the button out. 2 Press the EJECT button again to remove the card. Note Data are not guaranteed if the power is turned off or a memory card is removed while the card is being accessed. All data on the card may be destroyed. Be sure that the ACCESS lamps are lit in green or off when you turn off the power or remove memory cards. Using SxS Memory Cards 25