Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 135

Minimum subject illumination PMW-200: 0.12 lx (typical) (1920 × 1080/59.94i, F1.9, +18 dB, 64-frame accumulation) PMW-100: 0.40 lx (typical) (1920 × 1080/59.94i, F1.8, +18 dB, 64-frame accumulation) Shutter speed 1/32 ~ 1/2000 sec. Slow Shutter (SLS/EX SLS) 2, 3, 4, 5, 6, 7, 8, 16, 32, 64 frames Slow & Quick Motion 720p: 1 ~ 60 frames, 1 ~ 50 frames (for PAL Area, UDF) 1080p: 1 ~ 30 frames, 1 ~ 25 frames (for PAL Area, UDF) White balance Preset mode (3200K), Memory A mode, Memory B mode/ATW mode Gain -3, 0, 3, 6, 9, 12, 18 dB, AGC Inputs/Outputs Audio input XLR type 3-pin (2), female, LINE/MIC/ MIC+48V switchable LINE: +4 dBu MIC: -70 dBu to -30 dBu (Reference input level 0 dBu=0.775 Vrms) Video output BNC type (1), switchable with GENLOCK IN connector, HD-Y/ composite signal 1.0 Vp-p, 75 Ω AV multi-output AV multi-connector (1), audio output, composite signal Audio: -10 dBu (Under 47 kΩ load, reference level) Analog composite signal: NTSC or PAL SDI output BNC type (1), switchable with HD-SDI/ SD-SDI SMPTE292M/259M i.LINK IEEE 1394, 4-pin connector (1), HDV (HDV 1080i) / DV input/output, S400 Timecode input BNC type (1), switchable with TC OUT connector 0.5 V to 18 Vp-p, 10 kΩ Timecode output BNC type (1), switchable with TC IN connector 1.0 Vp-p, 10 kΩ GENLOCK input BNC type (1), switchable with VIDEO OUT connector 1.0 Vp-p, 75 Ω USB mini-B (1) Headphone output Stereo minijack (1) -18 dBu (Reference level output under 16Ω load) Speaker output Monaural Output: 250 mW DC input DC jack HDMI output Type A (1) LENS REMOTE (lens remote controller) connector (PMW-200 only) 8-pin round (1) External device connector (PMW-200 only) 4-pin (Type A) (1) Specifications 135 Appendices