Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 56

PICTURE PROFILE SET, Items, Subitems and setting values, Contents - pmw 200 white balance

Get Sony PMW200 PDF manuals and user guides View all Sony PMW200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Recording PICTURE PROFILE SET Items Subitems and setting values Contents Color Correction Setting (PMW-200 only) On / Off Adjusting the color phase in a specific area (Unselectable when "Multi Matrix" is Area Detection2) selected in the Multi Matrix Execute/Cancel mode) Set to "On" to enable the color phase adjustment for a specific area. (Simultaneous adjustment of multiple areas is not allowed. You can adjust it for one area only.) Execute to detect the color in the center of the screen. The area centering around the detected color of the range specified by "Target Width" becomes the target area of Color Correction. Area Indication1) On / Off Set to "On" to display the Zebra 1 pattern for the area targeted for Color Correction. Note The area where the Zebra 1 pattern is displayed and the area targeted for Color Correction, may differ. Target Phase 0 to 359 (130) Manually adjust the center color for the area targeted for Color Correction. White Setting the white balance offset and the color temperature of the preset white Target Width 0 to 90 (40) Level -99 to +99 (±0) Phase -99 to +99 (±0) Offset White On / Off Offset -99 to +99 (±0) Offset -99 to +99 (±0) Offset -99 to +99 (±0) Preset White 2100 to 10000 (3200) Note When Area Detection is executed, this setting is overwritten by the Area Detection result. Perform fine adjustment with this item as required. Set the width of color phase for the area targeted for Color Correction. Set the saturation for the color in the target area. Adjust the hue for the color in the target area. Set to "On" to shift the conversion value for auto white balance in Memory A or B mode and that for auto tracing white in ATW mode to a lower color temperature or a higher color temperature. Adjust the volume of the offset white (shifting volumes) of the conversion value in Memory A, Memory B, or ATW mode, respectively. Adjust the preset color temperature when Preset white balance mode is selected in steps of 100K. Notes • Except when the white balance is in Memory A or B mode or when ATW is active, you cannot confirm the result of changing the Offset White and Offset settings on the screen. • Except when Preset white balance mode is selected, you cannot confirm the result of changing the Preset White settings on the screen. 56 Useful Functions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
Useful Functions
56
Recording
Color Correction
(PMW-200 only)
Adjusting the color phase in
a specific area (Unselectable
when “Multi Matrix” is
selected in the Multi Matrix
mode)
Setting
On /
Off
Set to “On” to enable the color phase adjustment
for a specific area. (Simultaneous adjustment of
multiple areas is not allowed. You can adjust it for
one area only.)
Area Detection
2)
Execute/Cancel
Execute to detect the color in the center of the
screen. The area centering around the detected
color of the range specified by “Target Width”
becomes the target area of Color Correction.
Area Indication
1)
On /
Off
Set to “On” to display the Zebra 1 pattern for the
area targeted for Color Correction.
Note
The area where the Zebra 1 pattern is displayed and
the area targeted for Color Correction, may differ.
Target Phase
0 to 359 (
130
)
Manually adjust the center color for the area
targeted for Color Correction.
Note
When Area Detection is executed, this setting is
overwritten by the Area Detection result. Perform
fine adjustment with this item as required.
Target Width
0 to 90 (
40
)
Set the width of color phase for the area targeted for
Color Correction.
Level
–99 to +99 (±
0
)
Set the saturation for the color in the target area.
Phase
–99 to +99 (±
0
)
Adjust the hue for the color in the target area.
White
Setting the white balance
offset and the color
temperature of the preset
white
Offset White
On /
Off
Set to “On” to shift the conversion value for auto
white balance in Memory A or B mode and that for
auto tracing white in ATW mode to a lower color
temperature or a higher color temperature.
Offset<A>
–99 to +99 (±
0
)
Adjust the volume of the offset white (shifting
volumes) of the conversion value in Memory A,
Memory B, or ATW mode, respectively.
Offset<B>
–99 to +99 (±
0
)
Offset<ATW>
–99 to +99 (±
0
)
Preset White
2100 to 10000 (
3200
)
Adjust the preset color temperature when Preset
white balance mode is selected in steps of 100K.
Notes
•
Except when the white balance is in Memory A
or B mode or when ATW is active, you cannot
confirm the result of changing the Offset White
and Offset settings on the screen.
•
Except when Preset white balance mode is
selected, you cannot confirm the result of
changing the Preset White settings on the screen.
PICTURE PROFILE SET
Items
Subitems and setting values
Contents