Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 77

Audio Status Screen Output CH: External output/headphone output Depending on the setting of "Output CH" in "Audio Output" in the AUDIO SET menu and the setting of "Monitor CH," the audio channel(s) external output and headphones output is displayed as follows. • CH-1: When left/right are CH-1 • CH-2: When left/right are CH-2 • CH-3: When left/right are CH-3 • CH-4: When left/right are CH-4 • CH-1/CH-2: When left is CH-1 and right is CH- 2 (stereo) • CH-3/CH-4: When left is CH-3 and right is CH- 4 (stereo) • CH-1+CH-2: When both left and right are CH- 1 and CH-2 (monaural) • CH-3+CH-4: When both left and right are CH- 3 and CH-4 (monaural) Speaker: Speaker output The audio channel(s) output to the internal speaker is displayed. As the speaker is monaural, CH-1+CH2 or CH3+CH-4 is displayed when "Monitor CH" is set to stereo. With non-stereo settings, the setting of "Monitor CH" in "Audio Output" in the AUDIO SET menu is displayed as it is. CH-1/CH-2/CH-3/CH-4: Audio level meters The 4-channel audio level meters (2 meters when using 2-channel settings) are displayed. While recording (or standing by to record), the level of the audio inputs (the EE audio levels) are displayed. During playback, the audio playback level is displayed according to the setting of "Output CH" in "Audio Output" in the AUDIO SET menu. If audio is input from the i.LINK (HDV/DV) connector while displaying thumbnails, while playback is stopped, or while recording an external signal, the audio input level is displayed. In this case, the leftmost channels that are displayed are CH-1 and CH-2, regardless of the setting of "Output CH" in "Audio Output" in the AUDIO SET menu. Wind Filter The "On"/"Off" setting of Wind Filter is displayed to the right of each input source. Wind Filter settings can be made from "Wind Filter CH1" to "Wind Filter CH4" in "Audio Input" in the AUDIO SET menu. Video Status Screen Video Format Video Format: Video format setting The number of vertical lines, frame rate, scan format (i/P), and file system (UDF/FAT) of the video format set in "Format" in "System" in the OTHERS menu are displayed. Rec Mode: Recording bit rate (HD Mode only) The recording bit rate of the video format set in "Format" in "System" in the OTHERS menu is displayed. SDI Output: Output for SDI The "SDI" setting in "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET menu is displayed. HDMI Output: Output for HDMI The "HDMI" setting in "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET menu is displayed. i.LINK I/O: Input and output for i.LINK The "i.LINK" setting in "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET menu is displayed. Down Converter: SD output down-converter setting In HD mode, the "Down Converter" setting (Squeeze, Letterbox, Edge Crop) in the VIDEO SET menu is displayed. In SD mode, "Edge Crop" is displayed when EC (Edge Crop) in "Format" in "System" in the OTHERS menu is selected, and "Squeeze" is displayed when SQ (Squeeze) in "Format" in "System" in the OTHERS menu is selected. 23.98P Output: 23.98P output mode The "23.98P Output" setting (23.98PsF, 59.94i (2-3 Pull Down)) in the VIDEO SET menu is displayed. Button/Remote Status Screen Assign Button: Assignable button statuses The functions assigned with the "Assign Button" in the OTHERS menu to the respective assignable buttons are displayed. IR Remote: IR Remote Commander status The "IR Remote" setting in the OTHERS menu is displayed. Showing the Status Screens 77 Status Displays