Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 33

Preparations Depending on the microphone used, a humming/ buzzing noise may be recorded. In this case, inserting the cable of the external microphone into the cable clamp (page 46), which is located under the AUDIO IN CH-1/CH-2 connectors, should solve the problem. Making a Wi-Fi Connection Two types of Wi-Fi connections are available. In "ad-hoc mode", you can make a peer-to-peer WiFi connection between a computer and camcorder. In "infrastructure mode", you can make Wi-Fi connections between a computer and multiple camcorders via a wireless LAN access point (building a LAN). To make a network setting Change settings under OTHERS >Network in the setup menu as required. Item DHCP IP Address Subnet Mask Default Gateway User Name Password Setting Setting that specifies whether to acquire the IP address automatically from a DHCP server Enabled: Acquire automatically. Disabled: Do not acquire automatically (factory default setting). IP address a) (factory default setting: 192.168.1.10) Subnet mask (factory default setting: 255.255.255.0) Default gateway (factory default setting: 0.0.0.0) User name for log-in (factory default setting: admin) Password for log-in (factory default setting: model name "pmw-200") a) The IP address determined by DHCP server is displayed here. When you have changed a setting Set the Set item to [Execute]. When a confirmation message appears, use the up/down/ left/right buttons or the jog dial to select "Execute" and press the SEL/SET button or the jog dial. To make a connection in ad hoc mode 1 Refer to "Settings on the Computer" under "Making a Wi-Fi Connection to Your Computer (Ad hoc Mode)" in the Operating Instructions supplied with the CBK-WA01 to make settings on the computer. 2 Start a connection on the computer. 3 Set OTHERS >Wi-Fi >Wi-Fi to [Enable] in the setup menu. 4 Set OTHERS >Wi-Fi >Scan Networks to [Execute] and press the SEL/SET button or the jog dial. The camcorder starts scanning for a network connection. When networks are detected, the NETWORK SCAN list appears. 5 Turn the up/down/left/right buttons or the jog dial to select a network and press the SEL/SET button or the jog dial. The OTHERS menu appears again. 6 Confirm that the settings for the Wi-Fi item conform to the network setting on the computer. SSID (network name): Selected network name Network Type (connection mode): Adhoc CH (channel): 1 Authentication (network authentication): Depending the settings on the computer, Open, Shared or WPA Encryption (data encryption): Depending the settings on the computer, Disable, WEP, TKIP or AES WEP Key Index (key index): 1 when Encryption is set to [WEP] Input Select (key input format): Depending the network key (or security key), ASCII5, ASCII13, HEX10 or HEX26 when Encryption is set to [WEP], ASCII8-63 or HEX64 Encryption is set to [TKIP] or [AES] Using a Wi-Fi Adapter (PMW-200 only) 33