Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 29
Using Other Media, XQD Memory Cards
View all Sony PMW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Preparations To restore the hard disk Select "Execute" via the up/down/left/right buttons or the jog dial, then press the SEL/ SET button or the jog dial. During restoration, an in-progress message and status bar (%) are displayed, and the ACCESS lamp is lit in red. When restoration is completed, a completion message is displayed for three seconds. If restoration fails • A PHU-220R on which an error occurred may become usable again through reformatting. • In some cases, only parts of clips cannot be restored. Playback of the restored clips becomes possible again. Using Other Media XQD Memory Cards By using an optional QDA-EX1 Media Adaptor, you can insert an XQD memory card into the SxS memory card slot and use it instead of an SxS memory card. Usable XQD memory cards QD-H16, QD-H32 (as of March 2012) For details on using a QDA-EX1 Media Adaptor, refer to the instruction manual supplied with it. Notes • High-speed playback (page 15) may not be properly achieved with an XQD memory card. • Slow Motion recording by the Slow & Quick Motion recording function (page 51) cannot be made with an XQD memory card. • Not all XQD memory cards are guaranteed to work with this camcorder. For compatible memory cards, contact your dealer. Formatting When you use an XQD memory card with this camcorder, formatting is required. An XQD memory card to be used with this camcorder must be formatted using the format function of this camcorder. It is also necessary to format an XQD memory card for use if a caution message is displayed when you mount the XQD memory card. For an XQD memory card that was formatted with another system unsupported by this camcorder, the message "Unsupported File System" is displayed on the LCD monitor/EVF screen. Format the XQD memory card as instructed below. To execute formatting Using "Format Media" (page 101) in the OTHERS menu, specify "Media(A)" (slot A) or "Media(B)" (slot B), then select "Execute." An in-progress message and status bar (%) are displayed, and the ACCESS lamp lights in red. When formatting is completed, a completion message is displayed for three seconds. Using Other Media 29