Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 61
Deleting Clips, Storing/Retrieving the Setting Data, To delete using the assignable button - pmw 200 memory card
View all Sony PMW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Recording Deleting Clips While standing by to record, the Last Clip DEL function for deleting the last recorded clip and the All Clips DEL function for deleting all clips from an SxS memory card are available. For clip deletion on the thumbnail screen, see "Deleting Clips" on page 72. To delete using the assignable button Assign the Last Clip DEL function to one of the assignable buttons (page 49) in advance. Press the assignable button to which you have assigned "Last Clip DEL," and select "Execute" to delete the last recorded clip from the SxS memory card. To delete using the Setup menu Select "Last Clip DEL" in "Clip" (page 100) in the OTHERS menu, select "Execute," then select "Execute" again to delete the last recorded clip from the SxS memory card. Note When Clip Continuous Recording is set to "On," "Last Clip DEL" cannot be selected. Deleting clips collectively Select "All Clips DEL" in "Clip" (page 100) in the OTHERS menu, select "Execute," then select "Execute" again to delete all the clips from the SxS memory card. Notes • If the SxS memory card contains clips of both of HD Mode and SD Mode, only the clips of the currently selected mode are deleted. • Clips with the OK mark (page 48) cannot be deleted if FAT is selected for the file system. If UDF is selected, clips set to "Lock Clip" (page 69) cannot be deleted. Storing/Retrieving the Setting Data You can store all the menu settings (including picture profiles) as a setup file on an SxS memory card or a USB flash drive (PMW-200 only). By retrieving the stored setup file, the proper setup condition can be immediately obtained. Note Values for "Clock Set" and "Hours Meter" in the OTHERS menu are not stored. Storing the Setup file To use an SxS memory card Only one setup file-designated with the file name "SETUP.SUF"-can be stored on one SxS memory card. 1 Insert a memory card on which you wish to store the setup file to a card slot. Check that the corresponding memory card icon is displayed on the screen. If a memory card in the other slot is selected, press the SLOT SELECT button to switch. 2 Select "Store" in "Camera Data" (page 96) in the OTHERS menu, then select "EXECUTE." An in-progress message is displayed during writing. When writing is completed, a completion message is displayed. Notes • If a setup file already exists on the memory card you specified in Step 1, a message to confirm whether to overwrite the file is displayed. • If there is not sufficient space on the memory card, an error message is displayed. To use a USB flash drive (PMW-200 only, in UDF mode) Connect the formatted USB flash drive to the external device connector (page 31). Select All Save(USB) >Execute in step 2. Retrieving the Setup file To use an SxS memory card When you retrieve the stored setup file, the camcorder settings are changed according to the file. 1 Insert the memory card on which you stored the setup file into a card slot. Check that the corresponding memory card icon is displayed on the screen. If a memory card in the other slot is selected, press the SLOT SELECT button to switch. Useful Functions 61