Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 126
Warning indication, on LCD/EVF, Buzzer, Tally, lamps, Cause and measures, Appendices
View all Sony PMW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Warning indication on LCD/EVF Battery Error Please Change Battery Backup Battery End Please Change Unknown Media(A)2) Please Change Buzzer Media Error Media(A)2) Needs to be Restored Media Error Cannot Record to Media(A)2) Media Error Cannot Use Media(A)2) Will Switch Slots Soon No Clip Cannot Use Media(A)2) Unsupported File System Cannot Use Media(A)2) In UDF Mode Same File Already Exists Change Media(A)2) Video Format Mismatch Copy Protected Input Cannot Record Media Error Playback Halted Media(A)2) Error Media Reached Rewriting Limit Change Media (A)2) Tally lamps Cause and measures An error was detected with the battery pack. Replace the battery pack with a normal one. The remaining power of the backup battery is insufficient. Replace the battery with a new one. A partitioned memory card or one that contains recorded clips exceeding the number permitted with this camcorder is loaded. This card cannot be used with this camcorder. Remove it and load a compatible card. An error occurred with the memory card. The card requires restoration. Remove the card, load it again, and restore it. Recording cannot be done, as the memory card is defective. As playback may be possible, it is recommended to replace it with another card after copying the clips, as required. Neither recording nor playback can be done, as the memory card is defective. It cannot be operated with this camcorder. Replace it with another card. This is an advanced notice that the camcorder will switch from the current memory card to the other memory card for continuous recording. There are no clips in the memory card. Check the selected card. A card of a different file system or an unformatted card was inserted. It cannot be used with this camcorder. Replace it with another card or format it with this camcorder. A memory card incompatible with UDF mode is inserted. Replace the card from the respective slot, format it with the camcorder, or switch to UDF FAT mode. A clip with the same name exists in the memory card to which you want to copy. Replace the card from the respective slot with a different card. The external signal input via the i.LINK connection cannot be recorded, as the "Format" setting is different from the signal format of the external input signal. Change "Format" in "System" in the OTHERS menu to match it to that of the external signal. The external signal input via the i.LINK connection cannot be recorded, as the stream is copy-protected. Check the input signal. An error occurred in reading data from the memory card, and playback cannot be continued. If this frequently occurs, change the memory card after copying the clips, as required. Recording cannot be done, as an error occurred with the memory card. If this frequently occurs, change the memory card. The memory card comes to the end of its service life. Make a backup copy and replace the card with another one as soon as possible. Recording/playback may not be performed properly if you continue to use the card. For details, refer to the operating instructions of the memory card. Appendices 126 Error/Warning Indications