Sony PMW200 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 82

Setup Menu List, CAMERA SET Menu - pmw 2000

Page 82 highlights

Setup Menu List The functions and available settings of menus are listed below. The default settings set at the factory are shown in bold face (example: Speed). The items marked with [M] in the Menu items column cannot be set while displaying the thumbnail screen or during playback operations. CAMERA SET Menu CAMERA SET Menu items Subitems and setting values Contents Gain Setup Assigning gain levels to the three GAIN switch positions Low -3 / 0 / 3 / 6 / 9 /12 /18 dB Mid -3 / 0 / 3 / 6 / 9 /12 /18 dB High -3 / 0 / 3 / 6 / 9 /12 / 18 dB Set the gain level to be used when the switch is set to the L position. Set the gain level to be used when the switch is set to the M position. Set the gain level to be used when the switch is set to the H position. Shutter Mode Select modes of the Electronic Shutter. Specifying Speed / Angle / ECS / SLS Speed mode/Angle mode (standard modes): These modes operating (PMW-200 only) may be especially effective when you wish to record a conditions of the quick-moving subject with minimal blurring. You can electrical shutter select Speed mode to specify the shutter speed in seconds, PMW-200: or Angle mode to specify the shutter speed by the shutter Unselectable when angle. Supersensitized ECS (Extended Clear Scan) mode: This mode may be used to Slow Shutter mode shoot a monitor screen, eliminating horizontal bands. is set. SLS (Slow Shutter mode): The shutter speed is specified in PMW-100: the number of accumulated frames. Unselectable when Shutter Speed Set the shutter speed when Speed mode is selected. The Slow Shutter 1/32, 1/33, 1/40, 1/48, 1/50, available setting values vary depending on the frame mode/ 1/60, 1/96, 1/100, 1/120, 1/125, frequency of the video format selected. Supersensitized 1/250, 1/500, 1/1000, 1/2000 Slow Shutter mode Shutter Angle Set the shutter angle when Angle mode is selected. The or NightShot mode 11.25º / 22.5º / 45º / 72º / 86.4º / following frame rates are unavailable when "S&Q Motion" is is set. 90º / 144º / 150º / 172.8º / set from "1" to "16": 72°, 86.4°, 144°, 150°, 172.8°, 216°. 180º / 216º ECS Frequency 60.00 Set the ECS frequency when ECS mode is selected. The available setting values vary depending on the frame frequency of the video format selected. SLS Frame (PMW-200 only) 2 to 8 (Off) Set the number of frames to accumulate when SLS mode is selected. (Off): For S&Q Motion or the SP 24P format (The setting cannot be changed.) Menu Configuration and Detailed Settings 82 Setup Menu List

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142

Setup Menu List
82
Menu Configuration and Detailed Settings
The functions and available settings of menus are listed below.
The default settings set at the factory are shown in bold face (example:
Speed
). The items marked with
[M]
in the Menu items column cannot be set while displaying the thumbnail screen or during playback
operations.
Setup Menu List
CAMERA SET Menu
CAMERA SET
Menu items
Subitems and setting values
Contents
Gain Setup
Assigning gain
levels to the three
GAIN switch
positions
Low
–3 /
0
/ 3 / 6 / 9 /12 /18 dB
Set the gain level to be used when the switch is set to the L
position.
Mid
–3 / 0 / 3 / 6 /
9
/12 /18 dB
Set the gain level to be used when the switch is set to the M
position.
High
–3 / 0 / 3 / 6 / 9 /12 /
18
dB
Set the gain level to be used when the switch is set to the H
position.
Shutter
Specifying
operating
conditions of the
electrical shutter
PMW-200:
Unselectable when
Supersensitized
Slow Shutter mode
is set.
PMW-100:
Unselectable when
Slow Shutter
mode/
Supersensitized
Slow Shutter mode
or NightShot mode
is set.
Mode
Speed
/ Angle / ECS / SLS
(PMW-200 only)
Select modes of the Electronic Shutter.
Speed mode/Angle mode (standard modes): These modes
may be especially effective when you wish to record a
quick-moving subject with minimal blurring. You can
select Speed mode to specify the shutter speed in seconds,
or Angle mode to specify the shutter speed by the shutter
angle.
ECS (Extended Clear Scan) mode: This mode may be used to
shoot a monitor screen, eliminating horizontal bands.
SLS (Slow Shutter mode): The shutter speed is specified in
the number of accumulated frames.
Shutter Speed
1/32, 1/33, 1/40, 1/48, 1/50,
1/60, 1/96,
1/100
, 1/120, 1/125,
1/250, 1/500, 1/1000, 1/2000
Set the shutter speed when Speed mode is selected. The
available setting values vary depending on the frame
frequency of the video format selected.
Shutter Angle
11.25º / 22.5º / 45º / 72º / 86.4º /
90º / 144º / 150º / 172.8º /
180º
/ 216º
Set the shutter angle when Angle mode is selected. The
following frame rates are unavailable when “S&Q Motion” is
set from “1” to “16”: 72°, 86.4°, 144°, 150°, 172.8°, 216°.
ECS Frequency
60.00
Set the ECS frequency when ECS mode is selected. The
available setting values vary depending on the frame
frequency of the video format selected.
SLS Frame (PMW-200 only)
2
to 8 (Off)
Set the number of frames to accumulate when SLS mode is
selected.
(Off): For S&Q Motion or the SP 24P format (The setting
cannot be changed.)