Brother International WP700D Owners Manual - English - Page 104
Manual, Corrections
View all Brother International WP700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Manual Corrections CODE CORRECT When a correction is required above the current line, or if you have to reinsert the paper, the memory correction does not work because the line memory is cleared each time the paper is fed more than 1/12 inch. NOTE: This function cannot be executed while in the centering, right margin flush, decimal tab or UL mode. 1. Use ( )()E1 + sot* (or the platen knob) to position the carrier where a correction is required. Move the carrier to the character to be corrected with BACKSPACE or (SPACEBAR) . If necessary, use LODE) + IBS to accurately position the carrier. Congrstulations on your purchase of this new word A 2. Press CODE + CORRECT . The M C indicator appears. 3. Retype the same character again. The character is erased and the M.0 indicator disappears. Congr tulations on your purchase of this new word A 4. Type the desired character. Congratulations on your purchase of this new word A 96